So, post up your F50 Q, any mods or outstanding information, and pictures (of course!)..

Too bad i dont have an F50 to post to this thread.

Need a Nissan/Infiniti Mechanic around Indy OR Northern Indiana?? EMAIL ME!!!

NICO ECU's for sale

...jus remembered, my first mod was installing the splash guards on all four

Attachment: IMAGE_00005.jpg (58120 bytes, downloaded 5429 times)

Baby got back!

And, the nose...

Need to lower to obtain the more aggressive stance and still shopping for a body kit...

I also like the Auto-Couture kit. I found an image of the Auto-Couture F50 kit from the 2002 SEMA show...

I searched but was not able to locate more photos from the 2002 SEMA show. Perhaps someone else could search and provide some...

05 Q45 Black on Black.

You can order it from japan and see if it'll work. It cost me $1500 in shipping back and forth to test fit a bumper and it was a good lesson for me not to test fit parts from 1/2 way accross the world again

2002Q45Sport

Modified by mcrews at 1:56 PM 5/1/2006

Attachment: tire1.JPG (54589 bytes, downloaded 5309 times)

Those look to fit pretty nicely!!

Please comment on ride and handling differences over the original size tire. Did you have the Michelin Pilot Sport MXM4 before?

two issues:
the tire presure screen stilljust shows (*** PSI) on all four tires.
it's been a week and I thought it might reset automaticly. I chkd the owner manual and the downloaded FSM (thank you thank you!!!) and I gather they should work automaticly. THe shop that didthe mounting wasthe top installer in Sacramento on tire rack ratings....I'm going over to see them today. They did not relpace the stems.

also in the middle of last week the "low PResure" alert popped on for about half the day. all the tires were at 39 so a false alarm.

THe transmission "seems" to feel different. did I read somewhere that there is a "learning mode" ???

All and All, I am pleased with the result.

Attachment: tire3.JPG (41706 bytes, downloaded 4995 times)

Oh, what to do....

Mark

You're making me think about these as well now! I need to hurry up and decide. I REALLY can't stand the OEM MXM4 tires...

Thanks in advance!

Percy

http://nissaninfiniticlub.net/...19797

THe alum bumper piece makes a great mounting point. It is rock solid. I dropped straight down the edge of the alum. I made a 90 degree bend at the top of the strap steel. The bend at the the middle is at an angle to hang the light from. it allows for fine tuning the adjustment of the light because I could bend it at the middle and also adjust the two mounting screws that are on the light housing. THe housing just fit snug in the opening of the bumper.
I used a remote wiring kit so I did not have to find a way thru the body with the wires to a switch. The remote switch is like the key to the car but smaller.
THe lights have been in now about 3 months and are still tight in place.
When they are on at night the sides of the light pattern from the Q's lights get a wider closer in.
hope that helps.

Mark

Attachment: q45more004.jpg (70077 bytes, downloaded 4694 times)

Minor mods:
Magnum cross drilled rotors
Akebono ceramic pads
K&N filter

Mark

Thanks for the compliment. So far so good and I've noticed a better stopping power with this upgrade . I had my orig. rotors/brakes replaced 4 months ago. I had a choice between Hawk or Akebono brakes. Almost same price but decided with Akebono because I had the same brand put on my Accord V6.

Percy

Nice work, widebody!

Add a link to NICOclub to your site!

...even the HITMAN is on MySpace

Stacey Lynn Childs 1970-2007... Love of my life, my best friend, Heaven's prettiest angel. I miss you so much.

BTW...Falkdesigns was looking into getting some Tanabe springs from Japan for the F50.

I'm still waiting to hear from him...

BTW nice Q marksport, loving the drop and my rear tires are the same size so I have a great idea on how my car will look with that drop.

Falk keep me posted too on the tanabe springs

I bought new sensors from Nissan for these wheels, and they have to be initialized for them to work. When I switched back my 18s, it did not work. When I put these back on a few months later, it started working immediately once the wheels were rolling.

Q looks great btw!

Widebody, how did you make that roof spoiler?

All that just to get to the headlights! How about just changing a bulb in the housing? Do you think I would also need to do the same?

No burnt bulbs...I wanted to replace the factory high beams with whiter, brighter bulbs.