Stock Nissan and Infiniti Offset chart http://forums.nicoclub.com/zerothread?id=69378 Stock Nissan and Infiniti Offset chart en-us 2009-11-22T08:38:27-08:00 hourly 1 1970-01-01T00:00+00:00 Nissan Forums / Infiniti Forums - NICOclub http://images.zeroforum.com/new/1/pixel.gif http://forums.nicoclub.com Re: Stock Nissan and Infiniti Offset chart (phenryiv1) http://forums.nicoclub.com/zerothread?id=69378;postid=3975064#3975064 What would you recommed for this setup then.....My car is a 05 g35 coupe with rear camber and toe and front camber. I wanna put 10in wide tires all around either 19's or 20's. I was wondering what offset do you think I should go with Some magazine had a g35 coupe with 19x10 in the front and a bigger wheel in the back. I'm really looking to go 10in wide all around. I think that a deep dish all around and the ability to rotate my wheels would be and look great. I'm pretty sure that I will need to use a spacer in the back to properly line up the wheel evenly with the front. I'm most likely gonna roll my fenders as well just so that I can get some more cleareance over the tires. My car is a 05 g35 coupe with rear camber and toe and front camber. I wanna put 10in wide tires all around either 19's or 20's. I was wondering what offset do you think I should go with? Some magazine had a g35 coupe with 19x10 in the front and a bigger wheel in the back. I'm really looking to go 10in wide all around. I think that a deep dish all around and the ability to rotate my wheels would be and look great. I'm pretty sure that I will need to use a spacer in the back to properly line up the wheel evenly with the front. I'm most likely gonna roll my fenders as well just so that I can get some more cleareance over the tires.


]]> hernandez5749 2008-09-04T09:49:01-08:00 Re: (KineKilla) http://forums.nicoclub.com/zerothread?id=69378;postid=3975023#3975023 Check your manual. My 01 I30 manual says stock 16" wheel is 40mm offset and the stock 17" wheel is 45mm offset. MCovington 2008-09-04T09:38:21-08:00 Re: (gkb) http://forums.nicoclub.com/zerothread?id=69378;postid=3971609#3971609 The offset shouldn't be affected by the Diameter of the wheel. You would need to increase the offset if you were wanting to run Brembo's or other BBK. ]]> KineKilla 2008-09-03T10:58:08-08:00 http://forums.nicoclub.com/zerothread?id=69378;postid=3969560#3969560 are the stock offsets the same even when plus sizing wheels.2000 max gxe 20", offset would be 2000 max gxe 20", offset would be? ]]> gkb 2008-09-02T19:08:50-08:00 Re: (infinitiI30) http://forums.nicoclub.com/zerothread?id=69378;postid=975060#975060 Offset is a measurement on the wheel which determines how much space there is between the hub and the inside of the spokes. It is used to determine whether there is room for brake calipers and such with a particular wheel. At least, that's how I understand it. I've never really dealt with it. MinisterofDOOM 2004-12-15T22:57:07-08:00 http://forums.nicoclub.com/zerothread?id=69378;postid=974278#974278 sorry im a newb offset offset??? ]]> infinitiI30 2004-12-15T11:14:02-08:00 http://forums.nicoclub.com/zerothread?id=69378;postid=817486#817486 BTW, there is a WHOLE expanded chart in the wheels/tires forum. phenryiv1 2004-06-15T06:27:44-08:00 http://forums.nicoclub.com/zerothread?id=69378;postid=816592#816592 I believe tha tthe GXE is 15x6 w/ 40mm phenryiv1 2004-06-15T06:27:44-08:00 http://forums.nicoclub.com/zerothread?id=69378;postid=816579#816579 What about the 95-99 Max GXE BTW +1 for the offsets. BTW +1 for the offsets. ]]> jdmfreak 2004-06-15T06:27:44-08:00 Stock Nissan and Infiniti Offset chart http://forums.nicoclub.com/zerothread?id=69378;postid=727292#727292 Nissan: 15" x 6.5" 95-99 Maxima SE/GLE 40mm 16" x 6.5" 97-99 Maxima SE 40mm 16" x 6.5" 00-01 Maxima SE/GLE 40mm 16" x 6.5" 00-01 Maxima GXE 40mm 17" x 7" 00-03 Maxima SE 45mm 17" x 7" 02/03 Maxima 40mm 18" x 7.5" 04/05 Maxima18" x 8" 350Z 30mm Infiniti: 15" x 6.5" 96-99 I30 40mm 15" x 6.5" 96-97 I30t 45mm 15" x 7" Q45t 36mm 16" x 6.5" 98-99 I30t 45mm 16" x 7" Q45 40mm 16" x 6.5" 00-01 I30 45mm 17" x 7.5" Q45t 30mm 17" x 7" I30t 45mm 17" x 7" I35 40mm 17" x 7" I35 sport 45mm 17" x 7" G35 45mm 17" x 7" G35 sport 45mm 17" x 7.5" 02 Q45 40mm 18" x 7.5" Q45 45mm 18" x 7.5" M45 35mm 18" x 8" G35 coupe 30mm Centerbore on all 89+ Nissan/Infiniti cars is 66.1mm.Stock tire sizes:1991-1994 - 205/65R151995-1997 - 215/60R151998-1999 - 215/55R162000-2003 - 225/50R172004-2005 - 245/45R18Note: Additional information added via audtatious..... 15" x 6.5" 95-99 Maxima SE/GLE 40mm
16" x 6.5" 97-99 Maxima SE 40mm
16" x 6.5" 00-01 Maxima SE/GLE 40mm
16" x 6.5" 00-01 Maxima GXE 40mm
17" x 7" 00-03 Maxima SE 45mm
17" x 7" 02/03 Maxima 40mm
18" x 7.5" 04/05 Maxima
18" x 8" 350Z 30mm

Infiniti:

15" x 6.5" 96-99 I30 40mm
15" x 6.5" 96-97 I30t 45mm
15" x 7" Q45t 36mm
16" x 6.5" 98-99 I30t 45mm
16" x 7" Q45 40mm
16" x 6.5" 00-01 I30 45mm
17" x 7.5" Q45t 30mm
17" x 7" I30t 45mm
17" x 7" I35 40mm
17" x 7" I35 sport 45mm
17" x 7" G35 45mm
17" x 7" G35 sport 45mm
17" x 7.5" 02 Q45 40mm
18" x 7.5" Q45 45mm
18" x 7.5" M45 35mm
18" x 8" G35 coupe 30mm

Centerbore on all 89+ Nissan/Infiniti cars is 66.1mm.


Stock tire sizes:
1991-1994 - 205/65R15
1995-1997 - 215/60R15
1998-1999 - 215/55R16
2000-2003 - 225/50R17
2004-2005 - 245/45R18


Note: Additional information added via audtatious..... ]]> phenryiv1 2004-06-15T06:27:44-08:00