http://forums.nicoclub.com/zerothread?id=434986 coil melt down:( en-us 2009-11-22T18:35:55-08:00 hourly 1 1970-01-01T00:00+00:00 http://images.zeroforum.com/new/1/pixel.gif http://forums.nicoclub.com http://forums.nicoclub.com/zerothread?id=434986;postid=4885055#4885055 thaks ]]> NACHMAN 2009-07-03T12:52:48-08:00 http://forums.nicoclub.com/zerothread?id=434986;postid=4884201#4884201 could also be a bad ptu, the transistor for that channel could be stuck int he closed position and burn up the cop, but the ptu normally fails open evildky 2009-07-02T22:55:16-08:00 http://forums.nicoclub.com/zerothread?id=434986;postid=4883892#4883892 i had the same problem with my old n/a .. the inner coil turned to like a liquid plastic and ooozed out ahah but any way i just ended up changing it and it was fine jkilby18 2009-07-02T21:09:11-08:00 http://forums.nicoclub.com/zerothread?id=434986;postid=4883857#4883857 it is possible for a cop to go bad and meltdown, unusual but possible, try replacing the coil and see if it persists evildky 2009-07-02T20:58:28-08:00 http://forums.nicoclub.com/zerothread?id=434986;postid=4883194#4883194 That's sometimes the sign of a shorted wire. Have the wires on the front of the engine ever been hit by the fan If they aren't secured properly this can happen. Zwicked 2009-07-02T14:59:55-08:00 http://forums.nicoclub.com/zerothread?id=434986;postid=4883124#4883124 hy there! i have a 300zx n/a auto 2+2.it would run for abouth 15 minute and then shutdown, i was told that it my be the ptu so i got the update, and put it.when i turn the engine i notice tha one cylender wasnt working while looking for the one that wasnt working a weird smell came out and it was a coil that was melting or burning . i dont know what happen or what i did wrong can someone help out . it would run for abouth 15 minute and then shutdown, i was told that it my be the ptu so i got the update, and put it.
when i turn the engine i notice tha one cylender wasnt working while looking for the one that wasnt working a weird smell came out and it was a coil that was melting or burning . i dont know what happen or what i did wrong can someone help out .
]]> NACHMAN 2009-07-02T14:28:14-08:00