just did compression test... wat was urs mine was... http://forums.nicoclub.com/zerothread?id=434973 just did compression test... wat was urs mine was... en-us 2009-11-22T09:04:07-08:00 hourly 1 1970-01-01T00:00+00:00 Nissan Forums / Infiniti Forums - NICOclub http://images.zeroforum.com/new/1/pixel.gif http://forums.nicoclub.com Re: just did compression test... wat was urs mine was... (kc240guy) http://forums.nicoclub.com/zerothread?id=434973;postid=4887100#4887100 i still need to change all my valve seals and get it machined i might as well get the head ported & polished and clean the valves and get the, reseated... 24j0hn 2009-07-04T15:52:24-08:00 Re: just did compression test... wat was urs mine was... (Didderson) http://forums.nicoclub.com/zerothread?id=434973;postid=4886093#4886093 to quote Didderson (Also op, this is the 2nd time I've told you. your sig is filled with annoying nub grammar. the word site is a website, the word sight is the act of seeing.)He could mean this website.... you know, a play on words. He could mean this website.... you know, a play on words. ]]> kc240guy 2009-07-03T23:23:43-08:00 Re: just did compression test... wat was urs mine was... (Didderson) http://forums.nicoclub.com/zerothread?id=434973;postid=4885989#4885989 Just clean thr valves and head and do the seals...... If you don't feel like doing that take your head to a machine shop and have them sonic clean it for you and do the seals.Sandblasting valves....... thats as bad as flushing the dirty oil out with water. Or porting and polishing your head with sand via engine vacuum Sandblasting valves....... thats as bad as flushing the dirty oil out with water. Or porting and polishing your head with sand via engine vacuum ]]> OutToWinPAHC 2009-07-03T22:29:38-08:00 Re: just did compression test... wat was urs mine was... (24j0hn) http://forums.nicoclub.com/zerothread?id=434973;postid=4885943#4885943 You don't need new seats for the valves, just seals. Seafoam is great, but because you'll have the valves out your money'd be better spent on carb cleaner because it comes in a spray can. Steel wool it after soaking and you're good to go.Seafoam is better for use if you're not taking the head off because it uses combustion to extract carbon, but it still will do a bangup job without ignition. Seafoam is great, but because you'll have the valves out your money'd be better spent on carb cleaner because it comes in a spray can. Steel wool it after soaking and you're good to go.
Seafoam is better for use if you're not taking the head off because it uses combustion to extract carbon, but it still will do a bangup job without ignition. ]]> Didderson 2009-07-03T22:09:05-08:00 Re: just did compression test... wat was urs mine was... (Didderson) http://forums.nicoclub.com/zerothread?id=434973;postid=4884181#4884181 of course im going to put new seals and seats... and here is something i said earlierQuote, originally posted by 24j0hn valves seals are old and cracked so that i leak and id rather SEAFOAM Quote, originally posted by 24j0hn raquo;valves seals are old and cracked so that i leak

and id rather SEAFOAM ]]> 24j0hn 2009-07-02T22:50:48-08:00 Re: just did compression test... wat was urs mine was... (Didderson) http://forums.nicoclub.com/zerothread?id=434973;postid=4883962#4883962 true dat didderson sebazztard 2009-07-02T21:32:46-08:00 Re: just did compression test... wat was urs mine was... (sebazztard) http://forums.nicoclub.com/zerothread?id=434973;postid=4883907#4883907 Sand blasting the valves is NOT YOUR PROBLEM at this point buddy.Oil is sliding through where the long rod is on those valves. Called a valve seal. Take the head off and replace em. I did a writeup that didn't get put into the articles section that you may search for.Sandblasting them will help get the carbon off, but may just fuk up their surface so you'll have to re-seat them anyway. Just use goof off or carb cleaner to clean the valves duhhhedit for claro clarity:Your compression is wonderful, which means even IF your valves have soooo much carbon on them (LOL) they're seating and sealing perfectly fine. You're correct the problem is oil coming thru the valves, but it has nothing to do w/ the valve seal seeing as the valves OPEN and thus the oil slides down the shaft and valve and enters. Sry we were all nubs once. I apologize but you acted like you knew exactly what was wrong and you weren't totally right so...Also op, this is the 2nd time I've told you. your sig is filled with annoying nub grammar. the word site is a website, the word sight is the act of seeing. Modified by Didderson at 9:21 PM 7/2/2009 Oil is sliding through where the long rod is on those valves. Called a valve seal. Take the head off and replace em. I did a writeup that didn't get put into the articles section that you may search for.

Sandblasting them will help get the carbon off, but may just fuk up their surface so you'll have to re-seat them anyway. Just use goof off or carb cleaner to clean the valves duhhh

edit for claro clarity:
Your compression is wonderful, which means even IF your valves have soooo much carbon on them (LOL) they're seating and sealing perfectly fine. You're correct the problem is oil coming thru the valves, but it has nothing to do w/ the valve seal seeing as the valves OPEN and thus the oil slides down the shaft and valve and enters. Sry we were all nubs once. I apologize but you acted like you knew exactly what was wrong and you weren't totally right so...

Also op, this is the 2nd time I've told you. your sig is filled with annoying nub grammar. the word site is a website, the word sight is the act of seeing.

Modified by Didderson at 9:21 PM 7/2/2009 ]]> Didderson 2009-07-02T21:14:28-08:00 Re: just did compression test... wat was urs mine was... (24j0hn) http://forums.nicoclub.com/zerothread?id=434973;postid=4883868#4883868 Quote, originally posted by 24j0hn dat money Quote, originally posted by 24j0hn raquo;dat money


]]> sebazztard 2009-07-02T21:02:42-08:00 Re: just did compression test... wat was urs mine was... (pandapants) http://forums.nicoclub.com/zerothread?id=434973;postid=4883805#4883805 im going to get the valves sandblasted so that they sit on the head evenly... carbon build up sticks to the seat so that it doesnt sit evenly and im my case its because my valves seals are old and cracked so that i leak and when the oil burns it builds up on the valve...sand blasting is air and trillions of fine crystals be squirted at very high psi braking loose the carbon and making the valve like new... this way i dont need to buy new ones and save $300you guys make fun of me make fun of me like youve never heard of sand blasting before...

carbon build up sticks to the seat so that it doesnt sit evenly and im my case its because my valves seals are old and cracked so that i leak and when the oil burns it builds up on the valve...

sand blasting is air and trillions of fine crystals be squirted at very high psi braking loose the carbon and making the valve like new... this way i dont need to buy new ones and save $300

you guys make fun of me make fun of me like youve never heard of sand blasting before... ]]> 24j0hn 2009-07-02T20:37:00-08:00 Re: just did compression test... wat was urs mine was... (24j0hn) http://forums.nicoclub.com/zerothread?id=434973;postid=4883661#4883661 I don't get it.what are you going to sand blast and why what are you going to sand blast and why? ]]> pandapants 2009-07-02T19:28:55-08:00 Re: just did compression test... wat was urs mine was... (24j0hn) http://forums.nicoclub.com/zerothread?id=434973;postid=4883659#4883659 sweet ill keep and eye out when i need a good laugh hbpignosePA 2009-07-02T19:28:45-08:00 Re: just did compression test... wat was urs mine was... (hbpignosePA) http://forums.nicoclub.com/zerothread?id=434973;postid=4883638#4883638 i dunno wat that means... but yeah im foreal:)im so happy, cuz i was about to buy a new KA for $200... now i could use dat money for a in the engine bay rebuild...im gunna get a timimg chain from FRsport, a new knock sensor, and get my head machined along w/ valves... then ill need to find where my leak is coming from, reseal the oil pan w/ gasket, and thr in some nismo motor mounts:) look for a build coming soon!!! im so happy, cuz i was about to buy a new KA for $200... now i could use dat money for a in the engine bay rebuild...

im gunna get a timimg chain from FRsport, a new knock sensor, and get my head machined along w/ valves... then ill need to find where my leak is coming from, reseal the oil pan w/ gasket, and thr in some nismo motor mounts:)

look for a build coming soon!!! ]]> 24j0hn 2009-07-02T19:18:20-08:00 Re: just did compression test... wat was urs mine was... (xX RB Xx) http://forums.nicoclub.com/zerothread?id=434973;postid=4883550#4883550 damn dude are you for realor are you hear for our rolfcopters or are you hear for our rolfcopters? ]]> hbpignosePA 2009-07-02T18:24:16-08:00 Re: just did compression test... wat was urs mine was... (24j0hn) http://forums.nicoclub.com/zerothread?id=434973;postid=4883210#4883210 please do it.. i want to know what will the result will be ]]> xX RB Xx 2009-07-02T15:07:33-08:00 Re: just did compression test... wat was urs mine was... (xX RB Xx) http://forums.nicoclub.com/zerothread?id=434973;postid=4883166#4883166 yeah... im thinking of just sandblasting the whole damn thing 24j0hn 2009-07-02T14:50:13-08:00 Re: just did compression test... wat was urs mine was... (24j0hn) http://forums.nicoclub.com/zerothread?id=434973;postid=4883060#4883060 it could just mean that you need new valve stem seals xX RB Xx 2009-07-02T13:49:25-08:00 just did compression test... wat was urs mine was... http://forums.nicoclub.com/zerothread?id=434973;postid=4882990#4882990 cylinder 1 : 185 2 : 183 3 : 183 4 : 184im burning oil bad and suspected it was busted rings... but when i took out cylinder 2 some oil came out also... so it seems im burning oil from the the valves...this means i dont need to buy a new engine but need a head rebuild:) good news for me! 2 : 183
3 : 183
4 : 184

im burning oil bad and suspected it was busted rings... but when i took out cylinder 2 some oil came out also... so it seems im burning oil from the the valves...

this means i dont need to buy a new engine but need a head rebuild:) good news for me! ]]> 24j0hn 2009-07-02T13:13:00-08:00