Oh yeah...I remember my Granddad using a deflated basketball to pop a dent out of his door on his station wagon one time...I was about 7 at the time...so that was about...31 years ago. Since I've seen other guys that have done it...it works pretty good.

]]> wmdavis007 2009-07-04T00:53:49-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4886204#4886204 also when you go to flare/pull fenders, the little dent that it made right above the wheel arches..i know guys who do that and then just leave them inflated..its pretty ridiculous when sam bought his and he took them out thinking they were for s***z and giggles from the last guy..then cried when he came out the next day and saw those dents ]]> crash n' burn 2009-07-04T00:39:51-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4885455#4885455 Quote, originally posted by maj Andres Where do you all come up with these crazy ideas dude thats a classic, take a deflated basketball blatter, put it behind the dent, and slowly air it up. the pressure will pop the dent out. i know hot rod guys who have been doing that since before 240's even came out. Quote, originally posted by maj Andres raquo;
Where do you all come up with these crazy ideas?

dude thats a classic, take a deflated basketball blatter, put it behind the dent, and slowly air it up. the pressure will pop the dent out. i know hot rod guys who have been doing that since before 240's even came out. ]]> heartofaskyline 2009-07-03T16:27:46-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4885454#4885454 this does work. done it.heat and bottled air/dry ice does work. we use a similar method with window tint. (heat and water on plastic) heat and bottled air/dry ice does work. we use a similar method with window tint. (heat and water on plastic) ]]> moulton712 2009-07-03T16:27:34-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4884762#4884762 Quote, originally posted by ViciousCesar! can you get a deflated basketball in there with the door panel offWhere do you all come up with these crazy ideas Quote, originally posted by ViciousCesar! raquo;can you get a deflated basketball in there with the door panel off?
Where do you all come up with these crazy ideas? ]]> maj Andres 2009-07-03T10:07:30-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4884160#4884160 dental floss and some silly string. Papi Chulo 2009-07-02T22:43:43-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4884121#4884121 Try a plunger. s13beast 2009-07-02T22:25:26-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4883996#4883996 take the door panel off and push on it..if its going to pup at all, it'll do it like that..then wrap a hand towel around a 1ft socket..put that side against the dent and tap on the other side gently, did this to my 1/4 panel behind the door in almost the same shape with that crease..took some time bust i worked it out.worse case scenario....its still there but not as bad worse case scenario....its still there but not as bad? ]]> crash n' burn 2009-07-02T21:44:35-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4883880#4883880 For the guys who try the heat gun/compressed air CAN, turn the can upside down 2 get the dry ice.Ditto what HB said^ clean cress! Ditto what HB said^ clean cress! ]]> Didderson 2009-07-02T21:06:35-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4883740#4883740 dude i just noticed the cressidamore pics more pics?

]]> hbpignosePA 2009-07-02T20:10:52-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4883714#4883714 can you get a deflated basketball in there with the door panel off ViciousCesar! 2009-07-02T19:59:12-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4883655#4883655 try dry ice and a hammer ]]> 24j0hn 2009-07-02T19:27:42-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4883308#4883308 idk its right on the crease....but anythings possible.... but anythings possible.... ]]> s13momentum 2009-07-02T16:17:14-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4878521#4878521 i do it after every meet ZOMG.SR20 2009-06-30T19:12:52-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4878501#4878501 the hair dryer and compressed air is bs I've tried it a few times with no luck. Justin35ll 2009-06-30T19:07:55-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4878426#4878426 "Pop it like is HOOOOOTTTIf you got a dent in your 240, Pop it like its Hooooott" If you got a dent in your 240, Pop it like its Hooooott" ]]> Black on Gold 2009-06-30T18:45:31-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4878411#4878411 cressida. ]]> nightsleek240coupe 2009-06-30T18:40:04-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4878408#4878408 Don't work on creases. Tried it with a heat gun and dry ice. Karateboy88 2009-06-30T18:39:12-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4878356#4878356 ]]> motoman399 2009-06-30T18:17:46-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4878293#4878293 Quote, originally posted by ewok_sammich Werd. Get yourself a hair dryer, and a can of air duster. POP. Problem solved.What Quote, originally posted by ewok_sammich raquo;Werd. Get yourself a hair dryer, and a can of air duster. POP. Problem solved.

What? ]]> krayzie94 2009-06-30T17:49:31-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4878112#4878112 Werd. Get yourself a hair dryer, and a can of air duster. POP. Problem solved. ewok_sammich 2009-06-30T16:12:48-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4878109#4878109 IDK, looks like a nasty crease at the bottom.... ]]> cbt240sx 2009-06-30T16:11:53-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4878001#4878001 pop it!!! ZOMG.SR20 2009-06-30T15:27:00-08:00 http://forums.nicoclub.com/zerothread?id=434539;postid=4877857#4877857 Yea i got a dent on my door. I was wondering what do you guys think of it. Can it be popped out Or would I be better off calling a Pro dent remover.

]]> scuba_steve91 2009-06-30T14:23:09-08:00