http://forums.nicoclub.com/zerothread?id=433996 i need some help getting more drop out of my hardbody en-us 2009-11-21T04:35:02-08:00 hourly 1 1970-01-01T00:00+00:00 http://images.zeroforum.com/new/1/pixel.gif http://forums.nicoclub.com http://forums.nicoclub.com/zerothread?id=433996;postid=4951526#4951526 there are several things you can do to get the truck down. I just picked up some 3" drop spindles for the front amd 3 " lowered leaf packs from Stillen. All parts are Bell-tech. THe front spring hangars can be cut even with the lower part of the frame and redrilling a hole to move the laef pack closer to the frame. that mod is good for about 1.5" of drop. I recommend you get the rear frame notched for clearance otherwise you'll smack the axle to the frame over large bumps. I also picked up a full set of Nitro Drop @ shocks as well. This along with a set of 18" Titan 5 spokes should be nice. If you want to go lower you're talking major frame work. gtpboy00 2009-07-29T23:20:29-08:00 http://forums.nicoclub.com/zerothread?id=433996;postid=4882125#4882125 You could let the air out of the tires ]]> Desert Rat 2009-07-02T06:37:15-08:00 http://forums.nicoclub.com/zerothread?id=433996;postid=4881963#4881963 how low do you want to go Xtream Friction 2009-07-02T03:48:04-08:00 http://forums.nicoclub.com/zerothread?id=433996;postid=4872500#4872500 Getting the leafs re-arched is all I can think of. I think you can get a 2" drop from doing that. Drift21_Hardslider 2009-06-28T14:44:14-08:00 http://forums.nicoclub.com/zerothread?id=433996;postid=4870950#4870950 my hardbody is lowered 3'' on blocks and the end of my leaf springs are tore to s*** and scratched up and someone told me the other day i could do something and i could get more drop and fix the leaf spring problem anybody no how iDiiaBoLicaL 2009-06-27T19:06:48-08:00