http://forums.nicoclub.com/zerothread?id=433516 Clutch issues en-us 2009-11-21T02:25:26-08:00 hourly 1 1970-01-01T00:00+00:00 http://images.zeroforum.com/new/1/pixel.gif http://forums.nicoclub.com http://forums.nicoclub.com/zerothread?id=433516;postid=4882743#4882743 +1 +1 ]]> ABNRML4U 2009-07-02T11:21:08-08:00 http://forums.nicoclub.com/zerothread?id=433516;postid=4882274#4882274 Wow, way to be a prick trying to get your 10 posts. ]]> ProudNissanFreak 2009-07-02T07:47:32-08:00 http://forums.nicoclub.com/zerothread?id=433516;postid=4881985#4881985 check thickness of clutch disc and make sure the offset part is facing the pressure plate not the flywheel... Xtream Friction 2009-07-02T04:01:38-08:00 http://forums.nicoclub.com/zerothread?id=433516;postid=4881984#4881984 or if you resureface the flywheel the might of done it wrong tand took to much off it! Xtream Friction 2009-07-02T04:00:24-08:00 http://forums.nicoclub.com/zerothread?id=433516;postid=4881981#4881981 if so the clutch *throw out bearing* might of grinded through the pressure plate teeth! Xtream Friction 2009-07-02T03:58:48-08:00 http://forums.nicoclub.com/zerothread?id=433516;postid=4881980#4881980 did the clutch sound like if it would grind in the tranny Xtream Friction 2009-07-02T03:57:43-08:00 http://forums.nicoclub.com/zerothread?id=433516;postid=4881977#4881977 if you did not bleed the clutch then that the problem! Xtream Friction 2009-07-02T03:56:10-08:00 http://forums.nicoclub.com/zerothread?id=433516;postid=4881976#4881976 did you bleed the clutch Xtream Friction 2009-07-02T03:55:33-08:00 http://forums.nicoclub.com/zerothread?id=433516;postid=4881974#4881974 brake in is 500miles regular driveing~ Xtream Friction 2009-07-02T03:54:58-08:00 http://forums.nicoclub.com/zerothread?id=433516;postid=4881973#4881973 did you brake it in Xtream Friction 2009-07-02T03:54:15-08:00 http://forums.nicoclub.com/zerothread?id=433516;postid=4881972#4881972 is this a new clutch or an old clutch Xtream Friction 2009-07-02T03:53:33-08:00 http://forums.nicoclub.com/zerothread?id=433516;postid=4866303#4866303 First bleed and replace the fluid. If there's no improvement, it's probably the master. nametakennow 2009-06-25T19:27:15-08:00 http://forums.nicoclub.com/zerothread?id=433516;postid=4864924#4864924 I am having clutch issues on my 2001 Nissan Sentra SE 2.0. I push my clutch in and it does not return. I put my foot behind the clutch pedal and pull it up and the operation of the clutch slowly returns and works for brief time before not returning again. My clutch fluid is gray and dirty and was just below the minimum level before I added more. There are no visible leaks on the line. I will pull back the boot cover and check for a leak. Is it hard to replace the clutch master cylinder if that is what it is fiendelico 2009-06-25T11:05:33-08:00