But SRSLY, that Z is absolutely beautiful. Minus those two rips, I say 10/10. And you say there's a lot of work to be done. Psh. ]]> JDMZ32 2009-09-25T14:10:36-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=5094298#5094298 Quote, originally posted by heartofaskyline what are the sizes on them offsets15x7 0 offset Quote, originally posted by heartofaskyline raquo;what are the sizes on them? offsets?
15x7 0 offset ]]> kelloggman 2009-09-23T15:29:41-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=5094199#5094199 what are the sizes on them offsets heartofaskyline 2009-09-23T14:43:05-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=5092754#5092754 just came in. missing the z center caps it was suppose to come withthinkin about 195/45 in front and 205/50 in the back

thinkin about 195/45 in front and 205/50 in the back
]]> kelloggman 2009-09-22T22:29:53-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=5083086#5083086 new rotors look awesomenext is putting on tires next is putting on tires ]]> kelloggman 2009-09-18T22:52:27-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=5080575#5080575 update...replacing the old glazed over rotors that squeak to high heavengot them from msa and thats being done tomorrowi got a flat this week and hate the stocks so i bought a set from msa. gonna make my car look sexymsa is having a sale. fyi. alot of good stuff for cheaper than normalengine cleaning still in effectgonna take some time off buying stuff for itstart upgrading suspension after everything is paid off replacing the old glazed over rotors that squeak to high heaven
got them from msa and thats being done tomorrow
i got a flat this week and hate the stocks so i bought
a set from msa. gonna make my car look sexy
msa is having a sale. fyi. alot of good stuff for cheaper than normal

engine cleaning still in effect
gonna take some time off buying stuff for it
start upgrading suspension after everything is paid off

]]> kelloggman 2009-09-18T02:06:03-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=5023923#5023923 I have a manifold, it has a broken stud, but that's a easy fix, for a little extra I can take it to the local machine shop and get a new stud put in...email me if your interested riggs_hawkland@hotmail.com S130Z 2009-08-25T19:32:54-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=5018588#5018588 280zx turbo manifold is wat i meant to typemy bad my bad ]]> kelloggman 2009-08-23T18:25:47-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=5017834#5017834 yiou want exhaust to fit your chassis just get the MSA set evildky 2009-08-23T11:16:19-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=5016949#5016949 does anyone have a extra 280zx turbo exhaustor point me in the right direction or point me in the right direction ]]> kelloggman 2009-08-22T21:55:59-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=5012957#5012957 if you need any old z parts, im parting out a 74.5 260z, but have a large selection of parts 70 through 03. any year let me know. i have a 72z my dad has a 78 aswell . i just sold my 90 n/a and i have a 86 gll im fixing up and a 86 200sx turbo, and a 85 nissan 4x4 kind of like my nissans i guess. ur car looks good hope evrything goes well with the rest of your project s13420 2009-08-21T12:17:17-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=5006843#5006843 nice an0ther thing to take off my list ]]> kelloggman 2009-08-19T20:11:17-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=5005919#5005919 yea, that's the j-pipe you would need for the L28ET, if you plan on getting a intercooler, it replaces that pipe. S130Z 2009-08-19T19:07:28-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=5004711#5004711 is this my j pipe i needhttp://cgi.ebay.com/ebaymotors....m245 http://cgi.ebay.com/ebaymotors....m245 ]]> kelloggman 2009-08-19T13:09:23-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=5002596#5002596 it's a "T" fitting (actually it looks square) but is screws intot he oil pressure port, then the oil sender and turbo oil feel lines screw into it evildky 2009-08-18T19:18:37-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=5002364#5002364 wat is an oil t exactly and wat does it do kelloggman 2009-08-18T17:44:26-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4916638#4916638 the turbo distributor is optical and uses a nuique driveshaft, the turbo distributir can not work wiht the n/a electronic's and vice versathe HG thickness effects the compression ratio, stock HG is 1.5MM r there abuts, the thicker HG will lower your cr and the 1 mill will raise it it, it'snot much only about .5:1 cr difference from one extreme to the other IIRC the HG thickness effects the compression ratio, stock HG is 1.5MM r there abuts, the thicker HG will lower your cr and the 1 mill will raise it it, it'snot much only about .5:1 cr difference from one extreme to the other IIRC ]]> evildky 2009-07-16T20:18:00-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4915784#4915784 ty for help again what is the difference between a turbo and non turbo distributoron msa there are two metal hg the 1mm and 2mm what does the size difference do in regards to pressure and does it have a real impact at all what is the difference between a turbo and non turbo distributor

on msa there are two metal hg the 1mm and 2mm
what does the size difference do in regards to pressure and does it have a real impact at all ]]> kelloggman 2009-07-16T14:58:03-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4909905#4909905 EGR= Ehaust Gas Recirculationbasically it's a valve taht under vacume open up and let exhaust gas back into the itnake, to reburn, the theory is that it mroe completely burns for cleaner exhaust, the 1975 model 280z had no EGR valve makign ti a little lighter and less cumbersome and you don't have to worrk about adding an egr port to say an aftermarket headerdizzy=distributor basically it's a valve taht under vacume open up and let exhaust gas back into the itnake, to reburn, the theory is that it mroe completely burns for cleaner exhaust, the 1975 model 280z had no EGR valve makign ti a little lighter and less cumbersome and you don't have to worrk about adding an egr port to say an aftermarket header

dizzy=distributor ]]> evildky 2009-07-14T14:56:07-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4909867#4909867 dumb question what does egr and non egr meanalso what is a dizzy also what is a dizzy ]]> kelloggman 2009-07-14T14:31:35-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4903268#4903268 Sweet looking Z my friend! Looks like it has been very well looked after or someone has spent alot of time/money/effort on restoring it at one point. ]]> DORIFUTO_The Future 2009-07-11T18:24:35-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4902581#4902581 for megasquirt you don't need an afm. it has n on die map sensor, you can run the maf or afm but it just adds wiring and intake piping evildky 2009-07-11T10:03:22-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4902175#4902175 for the afm i can use the maf out off the 1st gen 300zxi plan on using one of the megasquirt ecu.ive been looking for a nice donor but havent found one yet :'-(im trying to line up a 280zx w/ a 5spd for 275 and i believe its an n/a evildky you are amazing btw i plan on using one of the megasquirt ecu.
ive been looking for a nice donor but havent found one yet :'-(

im trying to line up a 280zx w/ a 5spd for 275 and i believe its an n/a
evildky you are amazing btw
]]> kelloggman 2009-07-11T01:07:47-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4900608#4900608 the stronger block it a matter fo debate, the F54 was logn thought to be stronger, but only every other cylinder is siameased, ont he N42 al 6 cylinders are siameasedyes you can turbo the n42, then47 head is garbage, the n42 is the one you want, but you still need lots of partsoil panturbodownpipeoil "T"oil feed lineJ pipeafmharnessecuinjectorsdistributordistributor driveshaftits' easier and likely cheaper to get a complete donor and if you get a donor you might as well use the whole motor yes you can turbo the n42, then47 head is garbage, the n42 is the one you want, but you still need lots of parts
oil pan
turbo
downpipe
oil "T"
oil feed line
J pipe
afm
harness
ecu
injectors
distributor
distributor driveshaft

its' easier and likely cheaper to get a complete donor and if you get a donor you might as well use the whole motor ]]> evildky 2009-07-10T10:17:38-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4900089#4900089 quick qhow hard is it to turn an n/a engine 2 turboi believe the n42 block is the strongest out of all of them ravera btw how hard is it to turn an n/a engine 2 turbo

i believe the n42 block is the strongest out of all of them ravera btw

]]> kelloggman 2009-07-10T02:08:56-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4894953#4894953 i bought things in the wrong order.i bought forged pistons without the engine.was planning on buying an engine but the guy posted an engine in a neighboring city but lived in a completely different state. im looking at buying a part car next week for 700 so im hoping it lasts til then was planning on buying an engine but the guy posted an engine in a neighboring city but lived in a completely different state. im looking at buying a part car next week for 700 so im hoping it lasts til then ]]> kelloggman 2009-07-08T03:02:08-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4894702#4894702 F54 block is the stronger block but unless you've got custom pistions the F54/P90 gives you a low compression ratio (7,8 unless you've got the flat top N/a Motor). The N47 head will bump your compression and spool a turbo a little quicker. As for doing the swap, if you can find/rent an engine picker and have basic wrenches/jacks you can do the swap in a weekend. Hardest part is the wiring and there are plenty of diagrams around here and HybridZ that can show you just how to do it. And when you do it yourself you'll know where everything goes so if you ever get around to wanting it to go even faster, you probably will , you'll already know what to do As for doing the swap, if you can find/rent an engine picker and have basic wrenches/jacks you can do the swap in a weekend. Hardest part is the wiring and there are plenty of diagrams around here and HybridZ that can show you just how to do it. And when you do it yourself you'll know where everything goes so if you ever get around to wanting it to go even faster, you probably will , you'll already know what to do ]]> ravera 2009-07-07T22:42:01-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4890574#4890574 that Z is beautiful...looks like it just came off the showroom floor was it restored

was it restored? ]]> noobdrftr 2009-07-06T11:54:24-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4890077#4890077 perrenial i thought the same thing...thats a nice lookin z you got there. bigred240sx 2009-07-06T08:05:44-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4889774#4889774 way to much money to spend maybe later down the roadfrom wat ive heard the l28et is a beast ive just have to decide/find onestill debating the n42 block and head or f54/p90 so many choices maybe later down the road
from wat ive heard the l28et is a beast
ive just have to decide/find one
still debating the n42 block and head or f54/p90
so many choices ]]> kelloggman 2009-07-06T03:44:48-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4886293#4886293 very clean you could always throw an rb25det in there mikep1745 2009-07-04T03:24:59-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4880098#4880098 Why can't I find good cond. 240z's breadbox 2009-07-01T11:05:28-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4838625#4838625 That thing is fresh. Nice whip streeteg 2009-06-15T15:08:33-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4795549#4795549 Quote, originally posted by Perrenial Badass "Got alot to do" f*** son, when my 240 looks like that I'll call my project complete. LOL I was thinking the same. Great looking car. Quote, originally posted by Perrenial Badass raquo;"Got alot to do"? f*** son, when my 240 looks like that I'll call my project complete.

LOL

I was thinking the same. Great looking car. ]]> gmac708 2009-05-31T07:42:01-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4795535#4795535 beautiful man..... i miss my zeven if it was rotted beyond repair. i miss my z

even if it was rotted beyond repair. ]]> hbpignosePA 2009-05-31T07:26:37-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4795221#4795221 "Got alot to do" f*** son, when my 240 looks like that I'll call my project complete. ]]> Perrenial Badass 2009-05-30T23:21:28-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4795024#4795024 Nice s30! ]]> NSR_s30 2009-05-30T21:25:49-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4793710#4793710 looks great, nice find! evildky 2009-05-30T08:35:10-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4793543#4793543 looks like its in really good shape! good luck with your plans... i would do it myself since that swap is pretty much a bolt in upgrade mikeith 2009-05-30T06:19:03-08:00 http://forums.nicoclub.com/zerothread?id=427873;postid=4793314#4793314 this is my first 240z and it is amazinghahah got alot to do but here it ismy current interiorThe future:saving up for the l28et. ive found one that comes with intercooler for $500still debating to try myself or let the z car garage do itnew interior is neededa new coat of paint but its fine for now.couple of spots on the front and hatch with rust bubbles. super excited let me know what you guys think hahah got alot to do but here it is

my current interior

The future:
saving up for the l28et. ive found one that comes with intercooler for $500
still debating to try myself or let the z car garage do it
new interior is needed
a new coat of paint but its fine for now.
couple of spots on the front and hatch with rust bubbles.

super excited let me know what you guys think ]]> kelloggman 2009-05-30T01:43:08-08:00