I was there when they did the whole thing and it took a good 4 - 5 hours, Fabricating, positioning and welding.

It was definately a lot of money, but I was willing to give it up to get the good stuff. ]]> Mikey178 2009-07-05T07:46:10-08:00 http://forums.nicoclub.com/zerothread?id=382966;postid=4886158#4886158 $1400 ..... DOLLARSI always feel broke when I have to build everything myself and cant afford to just drop it off at shopsSo did you ditch the cats and resonators from the factory setup, or did they start behind them I always feel broke when I have to build everything myself and cant afford to just drop it off at shops

So did you ditch the cats and resonators from the factory setup, or did they start behind them ]]> W O T 2009-07-04T00:04:04-08:00 http://forums.nicoclub.com/zerothread?id=382966;postid=4885928#4885928 The cost was about $1400, Master Performance down on Kennedy Road in Brampton. All stainless steel with the Magnaflow muffler and Magnaflow dual exhaust tips. Mikey178 2009-07-03T22:01:53-08:00 http://forums.nicoclub.com/zerothread?id=382966;postid=4885167#4885167 how much did that setup cost you and where did you get it done Qxxx4 2009-07-03T13:52:06-08:00 http://forums.nicoclub.com/zerothread?id=382966;postid=4884769#4884769 I did my exhaust from the headers all the way back at the beginning of June. It sounds amazing.My setup, Magnaflow with dual in, dual out. Sounds amazing, Im trying to record the sound so that you guys can hear it but my camera doesn't take the greatest audio recordings. But it sounds really good, it has a deep tone. Did a dual out http://www.cardomain.com/ride/3310765/9 is where you'll find the pictures.I had to take the spare out, but with the rims and tires, i was like i'll ditch the spare. If I get a flat well I'll get it towed. Plus, look on the bright side, its 1 tire less I have to take around. My setup, Magnaflow with dual in, dual out. Sounds amazing, Im trying to record the sound so that you guys can hear it but my camera doesn't take the greatest audio recordings. But it sounds really good, it has a deep tone. Did a dual out http://www.cardomain.com/ride/3310765/9 is where you'll find the pictures.

I had to take the spare out, but with the rims and tires, i was like i'll ditch the spare. If I get a flat well I'll get it towed. Plus, look on the bright side, its 1 tire less I have to take around. ]]> Mikey178 2009-07-03T10:10:59-08:00 http://forums.nicoclub.com/zerothread?id=382966;postid=4857039#4857039 Running Magnaflow, the rear looking muffler is just a resonator (you dont need it). Sounds good but not too loud. GRNMACHINE 2009-06-22T20:13:57-08:00 http://forums.nicoclub.com/zerothread?id=382966;postid=4853310#4853310 I talked to one of the local exhaust shops and he's gonna weld up a cat back for me for $285 out the door. Sweet... AzPathy 2009-06-21T10:22:14-08:00 http://forums.nicoclub.com/zerothread?id=382966;postid=4849433#4849433 I've got exhaust . Its pretty deep for a R50 and its sound awesome when you floor it. I'll get some when i reverse/tap on gas and flooring it later on. Here's idle with Rev http://www.youtube.com/watchv=hFT7KWXn0gY . Its pretty deep for a R50 and its sound awesome when you floor it. I'll get some when i reverse/tap on gas and flooring it later on.

Here's idle with Rev

http://www.youtube.com/watch?v=hFT7KWXn0gY ]]> JonathanPrem 2009-06-19T09:23:53-08:00 http://forums.nicoclub.com/zerothread?id=382966;postid=4849094#4849094 yeah im considering doing an upgrade too since ive got a leak in my exhaust. I want to keep it single out exhaust....you guys think this would be an OK job for canadian tire and would i be stupid to use cherry bomb or magnaflow i want a deeper tone and a little louder but truckey sounding. WOT has the best sounding exhaust ive ever heard...he posted it on here a few months ago. Qxxx4 2009-06-19T06:54:03-08:00 http://forums.nicoclub.com/zerothread?id=382966;postid=4848857#4848857 Hey i got all new 2.5" pipes from the catalytic coverters back with a Flowmaster 40 series single out muffler and it sounds nice and throaty but not super loud pathy1217 2009-06-19T00:08:54-08:00 http://forums.nicoclub.com/zerothread?id=382966;postid=4848666#4848666 Seriously! Why won't anyone reply There has to be people with R50's and exhausts. AzPathy 2009-06-18T22:09:38-08:00 http://forums.nicoclub.com/zerothread?id=382966;postid=4195621#4195621 I desperately want to ditch the frigging stock exhaust on my R50....that damn heat shield has rattled since the day I bought it and it's too quiet. I already hacked the exhaust off to the rear of the main muffler (is that really TWO mufflers or is the rear one a resonator) for the main purpose of gaining a better departure angle (went hand in hand with losing the hitch reciever and spare tire)...anyway, it's already cut up, so I'm just gonna lose the stock muffler (and tear off that f**king shield while I'm at it)..so I'm gonna run something, but I want it loud...but no fart can. There's a video of on YouTube of a dude with a 3.0 with a 40 Series Flowmaster on his and it sounds AWESOME! I was considering throwing on a Cherry Bomb or Purple Horny, but I don't know that the 3.5 moves enough air to make it sound good. My brother tossed my old Bombs on his 5.7 Tahoe and it sounds great, but...like I said...I don't know that my motor moves enough air for it. So who's running what, and what does it sound like Like I said, I want something agressive...(I'd love to duplicate the sound of my wife's old GMC Sierra with a Flowmaster system on it...that was great)...Any input Thanks SixGuns 2008-11-09T23:00:58-08:00