http://forums.nicoclub.com/zerothread?id=357107 online tech, mods and anybody else please help... en-us 2009-11-22T03:46:00-08:00 hourly 1 1970-01-01T00:00+00:00 http://images.zeroforum.com/new/1/pixel.gif http://forums.nicoclub.com http://forums.nicoclub.com/zerothread?id=357107;postid=3893059#3893059 ABS control unit... so go ahead and delete this one Modified by allensteiner at 9:31 PM 8/6/2008 so go ahead and delete this one

Modified by allensteiner at 9:31 PM 8/6/2008 ]]> allensteiner 2008-08-06T20:54:21-08:00 http://forums.nicoclub.com/zerothread?id=357107;postid=3892306#3892306 anybody can you guys at least look at your ddls and tell me if you have 5 or 6 leads idk if it applies to anything else than a 95-96 since there's some differences after that. allensteiner 2008-08-06T16:31:26-08:00 http://forums.nicoclub.com/zerothread?id=357107;postid=3885959#3885959 why would they connect the ddl to obdII i need to know because my consult cable and software works only when the car is off and performs only the scanner functions - when the engine's running it doesn't detect the ecu at all and i'm wondering if it has anything to do with the extra wire. why would they connect the ddl to obdII? i need to know because my consult cable and software works only when the car is off and performs only the scanner functions - when the engine's running it doesn't detect the ecu at all and i'm wondering if it has anything to do with the extra wire. ]]> allensteiner 2008-08-04T20:22:28-08:00 http://forums.nicoclub.com/zerothread?id=357107;postid=3885578#3885578 Maybe that is a lead that goes over to the OBD II port on the passenger side above the ECU. jltibbs 2008-08-04T18:43:31-08:00 http://forums.nicoclub.com/zerothread?id=357107;postid=3885025#3885025 because 3 dealership service "specialists" couldn't. the consult connector under the dash is supposed to have 5 wires according to the fsm and those nissan techs. well, i have a 6th one in the spot #4 on the connector. is that for is that for ]]> allensteiner 2008-08-04T15:27:30-08:00