I have s13 engine+tranny, earl ss soft clutch line, nabco master+slave cylinder, manual crossmember, engine/tranny mounts, even got shiftboot

I am just missing a non abs s13 manual driveshaft, hard line, and clutch/brake pedals...

Hard line can be fabricated... so its not THAT much of an issue but id prefer getting it... and well manual driveshaft... is there any real difference between the abs and non abs ones... my car is non abs.... and last but not least i saw some sale on that courtesparts nissan site that u linked to mentioning clutch pedal... but is it the WHOLE package EVERYTHING thats needed or?...

And is it necessary to get brake pedal assembly from manual? What's the difference?

So again

-Hard line
-Driveshaft from non abs manual s13
-Clutch and brake pedal assembly

Help lt;IMG NAME="icon" SRC="http://images.nicoclub.com/forums/images/smilies/smile.gif" BORDER="0"gt;
i have a hard line for sale and it comes with a new rubber line to go from the dampener to the slave. make me an offer. ]]> 240s_are_the_best 2009-09-13T06:15:46-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=5041724#5041724 so here's the million-dollar question....is the swap worth it We all know finding a clean m/t 240 usually isn't as easy nor the same price as finding an a/t 240 usually isn't as easy nor the same price as finding an a/t 240 ]]> spooled240 2009-09-01T21:42:49-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=5039251#5039251 Quote, originally posted by sainifabulous oh crap i just used some today with my valve cover tell me there good pleaseWell here's the original post so id say it looks pretty legit and does cause corrosion by the sound of it.as much as i hate to tell you but that permatex gasket maker you just put on your thermostat housing is corrosive. i go to gibson technical center and they just had a guy from permatex come and talk to us and he said never to buy the red high temp permatex products because they're corrosive. he said the only reason they still make it is "idiots still buy it" now im not calling you an idiot because if he never came to us i would have used the same s*** but just for future reference the stuff is s*** but so far man its lookin damn good Quote, originally posted by sainifabulous raquo;
oh crap i just used some today with my valve cover
tell me there good please

Well here's the original post so id say it looks pretty legit and does cause corrosion by the sound of it.

as much as i hate to tell you but that permatex gasket maker you just put on your thermostat housing is corrosive. i go to gibson technical center and they just had a guy from permatex come and talk to us and he said never to buy the red high temp permatex products because they're corrosive. he said the only reason they still make it is "idiots still buy it" now im not calling you an idiot because if he never came to us i would have used the same s*** but just for future reference the stuff is s*** but so far man its lookin damn good

]]> drewce 2009-09-01T04:40:57-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=5039184#5039184 Quote, originally posted by drewce hey sorry to thread jack but i was reading upon a engine build on 240sxforumz and i came upon a post about some one saying "red high temp permatex products are corrosive" can som1 confirm this p.s i also ask because i see you are using/used it. oh crap i just used some today with my valve cover tell me there good please Quote, originally posted by drewce raquo;hey sorry to thread jack but i was reading upon a engine build on 240sxforumz and i came upon a post about some one saying "red high temp permatex products are corrosive" can som1 confirm this ?

p.s i also ask because i see you are using/used it.
oh crap i just used some today with my valve cover
tell me there good please ]]> sainifabulous 2009-09-01T00:58:03-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=5038708#5038708 seriously a mod should sticky this for the info, or put all the step by step info and everything in a article with the other ones. lol ]]> rsagen 2009-08-31T21:10:24-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=5036498#5036498 hey sorry to thread jack but i was reading upon a engine build on 240sxforumz and i came upon a post about some one saying "red high temp permatex products are corrosive" can som1 confirm this p.s i also ask because i see you are using/used it. p.s i also ask because i see you are using/used it. ]]> drewce 2009-08-31T01:28:42-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=5035186#5035186 yup it was the new pedal that i got with swap didnt have those i thought it was my wiring but yup turned out it was that thanks for the help i thought it was my wiring but yup turned out it was that
thanks for the help ]]> sainifabulous 2009-08-30T14:07:09-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=5034917#5034917 if your brake light stays on it might be the rubber thingy on the pedal. nightsauce 2009-08-30T11:13:31-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=5034852#5034852 Hey i just got done with my 5 speed swap. ive been searching but havent found nothing on this my brake light stay on and wont turn off the cluster lights stay on aswell i remember reading a thread on this but cant seem to find it i wish i read this thread when i was doing my 5 speed swap tho couldnt get past the nuetral switch lol edit: im sure its the not the brake sensor since i used the old one Modified by sainifabulous at 10:40 AM 8/30/2009 couldnt get past the nuetral switch lol

edit: im sure its the not the brake sensor since i used the old one

Modified by sainifabulous at 10:40 AM 8/30/2009 ]]> sainifabulous 2009-08-30T10:34:36-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3953858#3953858 HAHAHA my cruise control works!!! ]]> B-Boy DuB-L 2008-08-28T00:13:16-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3953856#3953856 Hahaha if only i knew how to make it work. Mine works perfectly lol.But then again i just left the auto brake pedal and cut it. Umm i have no idea why mine works. But then again i just left the auto brake pedal and cut it.

Umm i have no idea why mine works. ]]> B-Boy DuB-L 2008-08-28T00:13:05-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3951088#3951088 Quote, originally posted by BMAR240SX That is yet to be done I know how to make it work on s14, but not on s13. Quote, originally posted by BMAR240SX raquo;That is yet to be done

I know how to make it work on s14, but not on s13. ]]> 94_240sx 2008-08-27T07:39:29-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3951065#3951065 That is yet to be done ]]> BMAR240SX 2008-08-27T07:30:19-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3951053#3951053 No problem. Now, someone tell us how to make cruise control work. Mine doesn't work. Anyone ]]> 94_240sx 2008-08-27T07:25:33-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3950504#3950504 Yea thanks 94. I tried it again today and it works so Thank you. I really dont know why it didnt work last time i tried. Wierd B-Boy DuB-L 2008-08-26T22:02:55-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3950497#3950497 Thanks a lot man, hopefully i will get mine wired up soon, now if you can just pull pic's of the one to start the car the diagram is great actually pic's will finish it off. This is one hell of a thread all the info needs to be copy and pasted into one big page This is one hell of a thread all the info needs to be copy and pasted into one big page ]]> BMAR240SX 2008-08-26T22:01:10-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3947989#3947989 Quote, originally posted by B-Boy DuB-L Okinawa did you wire your reverse lights. I cant seem to figure mine out. PLus its really hard to see if they work wen ur the only one around. You have to set up a mirror and wut not. any help would be appreciatedHere you go.This is where the plug is located at. If you don't see these plugs right next to fuse/relay box, it has to be somewhere around that area. You see green and black wires They go to reverse light switch. Green and black are not original colors, so don't bother.Original colors are Green/Blue & Green/White. Green/Blue is constant boltage as you can see.Here's the overall view. First, locate 2nd plug from the top that has 8 wires coming out. You can go from there. If still doesn't work, it's something else. Quote, originally posted by B-Boy DuB-L raquo;Okinawa did you wire your reverse lights. I cant seem to figure mine out. PLus its really hard to see if they work wen ur the only one around. You have to set up a mirror and wut not.
any help would be appreciated

Here you go.

This is where the plug is located at. If you don't see these plugs right next to fuse/relay box, it has to be somewhere around that area.

You see green and black wires? They go to reverse light switch. Green and black are not original colors, so don't bother.

Original colors are Green/Blue Green/White. Green/Blue is constant boltage as you can see.

Here's the overall view. First, locate 2nd plug from the top that has 8 wires coming out. You can go from there. If still doesn't work, it's something else.

]]> 94_240sx 2008-08-26T06:24:27-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3947831#3947831 ya i bought the d/s off ebay. darens13 2008-08-26T03:05:15-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3947829#3947829 haha sweet man, did you order a drive shaft online or somethingi still need a shift knob, i've droven about 1k miles so far without a shift knob lol i still need a shift knob, i've droven about 1k miles so far without a shift knob lol ]]> okinawa drift 2008-08-26T03:03:21-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3947824#3947824 for sure man. i live in cedar flat up the road across from the deli and mather's market.oh ya i, i got my 5 speed transmission, driveshaft is on its way, so its coming along.....slowly. oh ya i, i got my 5 speed transmission, driveshaft is on its way, so its coming along.....slowly. ]]> darens13 2008-08-26T02:36:44-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3947821#3947821 damn daren, yeah its deerhorn, its reallly nice during the day, and ****ing scary at night.. hahah i drove there one night with my friend.. almost **** my pants.. i was so afraid.. hahahyou live in thurston daren we gotta drive on this one road called wolf creek road, i heard its crazzzy you live in thurston daren?

we gotta drive on this one road called wolf creek road, i heard its crazzzy ]]> okinawa drift 2008-08-26T02:32:05-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3947813#3947813 Quote, originally posted by ryan15 SIck, is that down 126 by the river i cant picture where the first pic is but the other two are on deerhorn road for sure, i drive it coming home from work sometimes. wayyy fun at night when there are no deer or crittersto run over! Quote, originally posted by ryan15 raquo;SIck, is that down 126 by the river? i cant picture where the first pic is but the other two are on deerhorn road for sure, i drive it coming home from work sometimes. wayyy fun at night when there are no deer or crittersto run over! ]]> darens13 2008-08-26T02:13:51-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3947715#3947715 hmm do you have any pics of how you connected the wires maybe you connected the wrong wires or something okinawa drift 2008-08-25T23:51:22-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3947688#3947688 the funny thing was i did that and no lights came on. Is that an indication that the sensor might be **** ]]> B-Boy DuB-L 2008-08-25T23:27:02-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3947674#3947674 yeah, just run the green and black wire from the plug to your reverse sensor..and to see if they work just turn the ignition on, not the car, and put the car in reverse, and they should come on and to see if they work just turn the ignition on, not the car, and put the car in reverse, and they should come on ]]> okinawa drift 2008-08-25T23:19:30-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3946929#3946929 Okinawa did you wire your reverse lights. I cant seem to figure mine out. PLus its really hard to see if they work wen ur the only one around. You have to set up a mirror and wut not. any help would be appreciated any help would be appreciated
]]> B-Boy DuB-L 2008-08-25T18:32:13-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3946170#3946170 ohh ok i got it, i dunno what i was doing wrong before but it slid right in this time, probably put it on upside down last time..thanks guys! thanks guys! ]]> okinawa drift 2008-08-25T14:28:03-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3945157#3945157 Quote, originally posted by BMAR240SX In the console if you flip it over you will see that there is a set of screws for the second trim that was where the auto trim went, if you take that off you will have the space of a manual trim, but i never bothered to check if i can screw it on. To me it didn't look like it would work so i just left itYou are talking about RADIO TRIM. A retangular piece needs to be removed from radio trim and leather boot will go into that place.Remove 96960 and attach 96935. That's the only difference between auto and manual transmission center consoles/radio trims. Modified by 94_240sx at 9:35 AM 8/25/2008 Quote, originally posted by BMAR240SX raquo;In the console if you flip it over you will see that there is a set of screws for the second trim that was where the auto trim went, if you take that off you will have the space of a manual trim, but i never bothered to check if i can screw it on. To me it didn't look like it would work so i just left it

You are talking about RADIO TRIM. A retangular piece needs to be removed from radio trim and leather boot will go into that place.

Remove 96960 and attach 96935. That's the only difference between auto and manual transmission center consoles/radio trims.


Modified by 94_240sx at 9:35 AM 8/25/2008 ]]> 94_240sx 2008-08-25T09:06:30-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3945064#3945064 In the console if you flip it over you will see that there is a set of screws for the second trim that was where the auto trim went, if you take that off you will have the space of a manual trim, but i never bothered to check if i can screw it on. To me it didn't look like it would work so i just left it ]]> BMAR240SX 2008-08-25T08:28:11-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3945013#3945013 Quote, originally posted by okinawa drift i've been really lazy to install the boot, but is an auto center console and manual center console the same when i try and put on the trim with the boot attached to it, it won't go on..They are same. Do you have pics I'm having hard time visualing what you are trying to do. Quote, originally posted by okinawa drift raquo;i've been really lazy to install the boot, but is an auto center console and manual center console the same?

when i try and put on the trim with the boot attached to it, it won't go on..

They are same. Do you have pics? I'm having hard time visualing what you are trying to do. ]]> 94_240sx 2008-08-25T08:08:00-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3944557#3944557 i've been really lazy to install the boot, but is an auto center console and manual center console the same when i try and put on the trim with the boot attached to it, it won't go on.. when i try and put on the trim with the boot attached to it, it won't go on.. ]]> okinawa drift 2008-08-25T00:36:57-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3933833#3933833 finally done! I couldn't help much at all since I know nothing of the swap but I'm glad you got it done ]]> spooled240 2008-08-20T23:39:06-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3933586#3933586 Yea that needs to get covered real good, the last thing i want is to get a ticket for no reverse lights, i might take it to my mechanic and show him the pic's and let him take a shot but i don't want to pay 40 buck's for somthing so cheap BMAR240SX 2008-08-20T21:40:01-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3931742#3931742 Quote, originally posted by BMAR240SX This thread basically has anything and everything you need, except the wiring which needs to be displayed easierYour right i still havent wired up my reverse lights i dont really understand how to. The threads covering it all have different colored wires then mine. Mine are all solid colors. I thought it was the green and black wires that you have to connect but it turns out nothing worked so idk. I'm kinda stuck. anyone want to help Quote, originally posted by BMAR240SX raquo; This thread basically has anything and everything you need, except the wiring which needs to be displayed easier

Your right i still havent wired up my reverse lights i dont really understand how to. The threads covering it all have different colored wires then mine. Mine are all solid colors. I thought it was the green and black wires that you have to connect but it turns out nothing worked so idk. I'm kinda stuck. anyone want to help? ]]> B-Boy DuB-L 2008-08-20T11:36:01-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3931712#3931712 Quote, originally posted by okinawa drift hmm, i don't really have any pics of the engine/tranny but i do have pics of the car lol..Come one!! We need at least picture of the shifter!! Good job BTW. Quote, originally posted by okinawa drift raquo;hmm, i don't really have any pics of the engine/tranny but i do have pics of the car lol..

Come one!! We need at least picture of the shifter!!

Good job BTW. ]]> 94_240sx 2008-08-20T11:26:19-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3931373#3931373 Quote, originally posted by pArAdOxsqUArE i'm keeping my eye on this thread. .about to do one myself. This thread basically has anything and everything you need, except the wiring which needs to be displayed easier Quote, originally posted by pArAdOxsqUArE raquo;i'm keeping my eye on this thread. .about to do one myself. This thread basically has anything and everything you need, except the wiring which needs to be displayed easier ]]> BMAR240SX 2008-08-20T09:35:14-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3930747#3930747 SIck, is that down 126 by the river ryan15 2008-08-20T02:29:51-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3929707#3929707 hmm, i don't really have any pics of the engine/tranny but i do have pics of the car lol..

]]> okinawa drift 2008-08-19T18:18:18-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3921580#3921580 got any pics of the finished product aaronscomp 2008-08-16T17:00:22-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3921574#3921574 COngrats on finishin SWap everything still runnin smooth crosser72 2008-08-16T16:57:09-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3921551#3921551 i'm keeping my eye on this thread. .about to do one myself. pArAdOxsqUArE 2008-08-16T16:45:13-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3916974#3916974 what a long progress. finally pay off for you ]]> night240 2008-08-14T23:25:35-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3916829#3916829 thanks 94_Quote, originally posted by BMAR240SX I left the metal one in there and started the car today i am officially 5 speed swapped, i had no leaks whats so ever and i left the bolt out but in but more out so it doesn't hit anything in the enginecongrats man, me too, started the car on 8.8.08 .. hahah no leaks or anything.. YET but it feels pretty good.. finally done..thanks for all your help guys

Quote, originally posted by BMAR240SX raquo;

I left the metal one in there and started the car today i am officially 5 speed swapped, i had no leaks whats so ever and i left the bolt out but in but more out so it doesn't hit anything in the engine

congrats man, me too, started the car on 8.8.08 .. hahah no leaks or anything.. YET but it feels pretty good.. finally done..

thanks for all your help guys ]]> okinawa drift 2008-08-14T22:10:49-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3916590#3916590 I left the metal one in there and started the car today i am officially 5 speed swapped, i had no leaks whats so ever and i left the bolt out but in but more out so it doesn't hit anything in the transmissionMajor Edit Very tired night Modified by BMAR240SX at 6:36 AM 8/15/2008
Major Edit

Very tired night

Modified by BMAR240SX at 6:36 AM 8/15/2008 ]]> BMAR240SX 2008-08-14T20:46:02-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3914376#3914376 Quote, originally posted by okinawa drift hmm about the crank angle sensor, since the a/t had it and it on my tranny wiring harness, do i just toss the sensor since it doesn't hook up to the m/tYes. Quote, originally posted by okinawa drift raquo;hmm about the crank angle sensor, since the a/t had it and it on my tranny wiring harness, do i just toss the sensor since it doesn't hook up to the m/t?

Yes. ]]> 94_240sx 2008-08-14T08:53:23-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3914350#3914350 hmm about the crank angle sensor, since the a/t had it and it on my tranny wiring harness, do i just toss the sensor since it doesn't hook up to the m/t okinawa drift 2008-08-14T08:46:17-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3913416#3913416 use a wrench haha. Umm idk mine i basically just twisted off with my fingers. But wut u can try is to bolt the slave onto the tranny and since it is secure and wont move then unscrew the soft line B-Boy DuB-L 2008-08-13T21:59:47-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3912940#3912940 O snap guess i will have to get that than, thanks man.Do you have a strategy on getting the an old slave off the soft line Do you have a strategy on getting the an old slave off the soft line? ]]> BMAR240SX 2008-08-13T19:28:14-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3912844#3912844 i got it from autozone here http://www.autozone.com/select...p.htm #1 is the rubber piece/part#2 is the part that you twist http://www.autozone.com/select...p.htm

#1 is the rubber piece/part
#2 is the part that you twist ]]> B-Boy DuB-L 2008-08-13T19:06:46-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3909452#3909452 Rubber what type of drain plug you got, i have a metal drain plug. If you can find pictures of what you got cause if i am doing this wrong and effing up my transmission If you can find pictures of what you got cause if i am doing this wrong and effing up my transmission ]]> BMAR240SX 2008-08-12T16:53:16-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3908523#3908523 Did u twist the handle wen u put it in When you twist the handle the rubber expands B-Boy DuB-L 2008-08-12T11:34:51-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3907550#3907550 I did that size it didn't work, i brought the sensor with me and the guy tested it out and the exact size was a m14 BMAR240SX 2008-08-12T02:53:26-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3906981#3906981 im telling you just go to autozone get the 1/2 universal drain plug it fits perfect B-Boy DuB-L 2008-08-11T20:57:35-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3906698#3906698 I got sort of a long one i have to pull it out a bit and tape up the ends of it so it doesn't leak with it half in there BMAR240SX 2008-08-11T19:26:55-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3905814#3905814 Nice to see you're still working on yours too. Any thought given to adding the safety cutout switch to the clutch pedal and wiring it in line with that "JUMP" You can resurrect the need to press the clutch on start. I think thats how I'm going to do mine.Hey does that green box exist in the 96 s14 I dont recall seeing one. Hey does that green box exist in the 96 s14? I dont recall seeing one.
]]> verSat1l3 2008-08-11T14:48:08-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3904145#3904145 haha damn the home depot and lowes i went to had nothing bigger then a m10 wtf lol good job. make sure they are pretty short though cuz ifit not i feel it will **** up trans cuz pieces in there move with each gear., which would press the sensor tip in but the screw doesnt get pressed in so it will **** it up B-Boy DuB-L 2008-08-10T22:51:35-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3903059#3903059 The right size to plug in the sensors is a m14 1.50 ]]> BMAR240SX 2008-08-10T16:15:37-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3900120#3900120 Its not a m-12 i am going to try m 14 today BMAR240SX 2008-08-09T09:14:56-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3888525#3888525 haha yea now you know wut "jump" is lolanyway the automatic drain plug will not work. Or at least im pretty sure. The universal drain plug for the engine oil is good to use. The rubber expands and creates a seal lol

anyway the automatic drain plug will not work. Or at least im pretty sure. The universal drain plug for the engine oil is good to use. The rubber expands and creates a seal ]]> B-Boy DuB-L 2008-08-05T14:36:12-08:00 http://forums.nicoclub.com/zerothread?id=333025;postid=3887322#3887322 Quote, originally posted by okinawa drift ok so, in order for the car to START all you have to do is this right..then plug it in rightNow you know what "JUMP" is. Quote, originally posted by okinawa drift raquo;ok so, in order for the car to START all you have to do is this right..

then plug it in right?

Now you know what "JUMP" is. ]]> 94_240sx 2008-08-05T08:44:01-08:00