Sportmax 501 16x8 +15 Fitment http://forums.nicoclub.com/zerothread?id=275462 Sportmax 501 16x8 +15 Fitment en-us 2009-11-22T04:07:22-08:00 hourly 1 1970-01-01T00:00+00:00 Nissan Forums / Infiniti Forums - NICOclub http://images.zeroforum.com/new/1/pixel.gif http://forums.nicoclub.com Re: Sportmax 501 16x8 +15 Fitment (GTR PrYdE) http://forums.nicoclub.com/zerothread?id=275462;postid=4422086#4422086 ive got them in 16x8 +15 all around with 225/50/16 and they didnt fit in the front with stock suspension, it rubbed the perch, but other then that i got tein ha coilovers and everything was fine, i rolled the rear fenders and the front i left alone and i havent had a problem since, the front rubs here and there over large bumps but thats it michaelmontuori 2009-01-31T22:45:55-08:00 http://forums.nicoclub.com/zerothread?id=275462;postid=3336428#3336428 Here's from the front. O.E. camber settings
]]> Eddie 2008-01-31T11:53:58-08:00 Re: Sportmax 501 16x8 +15 Fitment (GTR PrYdE) http://forums.nicoclub.com/zerothread?id=275462;postid=3336420#3336420 It's not an s13 but they are 16x8 +18 with a 225/50/16 ]]> Eddie 2008-01-31T11:50:43-08:00 Re: Sportmax 501 16x8 +15 Fitment http://forums.nicoclub.com/zerothread?id=275462;postid=3009949#3009949 Anybody who's used 225/50/16s with this wheel How well did it fit GTR PrYdE 2007-10-08T12:14:43-08:00 http://forums.nicoclub.com/zerothread?id=275462;postid=2916056#2916056 rucas are only to correct cambermore camber would lessen rubbing chances more camber would lessen rubbing chances ]]> yokota180sx 2007-08-29T21:14:29-08:00 Re: Sportmax 501 16x8 +15 Fitment (kirk) http://forums.nicoclub.com/zerothread?id=275462;postid=2915725#2915725 I did read the database! lol but I wanted to know if ruca's were needed and if 225s would fit without rubbingThanks-Devin Thanks

-Devin ]]> GTR PrYdE 2007-08-29T19:24:45-08:00 http://forums.nicoclub.com/zerothread?id=275462;postid=2914981#2914981 yay fitment database halfway did something yokota180sx 2007-08-29T15:19:04-08:00 Re: Sportmax 501 16x8 +15 Fitment (GTR PrYdE) http://forums.nicoclub.com/zerothread?id=275462;postid=2914478#2914478 Look at the fitment database up top.I've got the 16x8's +15 on 205/50r16 with stock fenders and I'm pretty low.You shouldn't have any problems with stock suspension. I've got the 16x8's +15 on 205/50r16 with stock fenders and I'm pretty low.

You shouldn't have any problems with stock suspension. ]]> kirk 2007-08-29T11:49:36-08:00 Sportmax 501 16x8 +15 Fitment http://forums.nicoclub.com/zerothread?id=275462;postid=2914347#2914347 Hey guys,I've been looking alot into these wheels for my s13, 16x8+15 501's, and I see that alot of people have run them- but I also know alot of those people run coilovers and ruca's, roll their fenders. I'm on totally stock suspension(except sways) and untouched fenders.What all is actually needed to run them ok I'd like to put 225s on them, hopefully they'd fit without rubbing Front or Rear.I liked the sportmax 002's better, but with a +0 offset I think it'd cost too much to pull off.Thanks for the help, let me know if I left anything out.-Devin I've been looking alot into these wheels for my s13, 16x8+15 501's, and I see that alot of people have run them- but I also know alot of those people run coilovers and ruca's, roll their fenders. I'm on totally stock suspension(except sways) and untouched fenders.

What all is actually needed to run them ok?

I'd like to put 225s on them, hopefully they'd fit without rubbing Front or Rear.

I liked the sportmax 002's better, but with a +0 offset I think it'd cost too much to pull off.

Thanks for the help, let me know if I left anything out.

-Devin ]]> GTR PrYdE 2007-08-29T11:02:51-08:00