1991-1994 240sx: Door panel removal tutorial. http://forums.nicoclub.com/zerothread?id=253736 1991-1994 240sx: Door panel removal tutorial. en-us 2009-11-21T23:54:14-08:00 hourly 1 1970-01-01T00:00+00:00 Nissan Forums / Infiniti Forums - NICOclub http://images.zeroforum.com/new/1/pixel.gif http://forums.nicoclub.com Re: (yokota180sx) http://forums.nicoclub.com/zerothread?id=253736;postid=3210829#3210829 way to totally use my picture for the door panel removal tutorial ]]> Spiffy240 2007-12-18T19:06:24-08:00 http://forums.nicoclub.com/zerothread?id=253736;postid=2678683#2678683 you should however, pull from the bottom so you dont damage the seal at the top of the door yokota180sx 2007-05-29T05:40:16-08:00 1991-1994 240sx: Door panel removal tutorial. http://forums.nicoclub.com/zerothread?id=253736;postid=2678454#2678454 Index of all TutorialsDoor panel removal:1. Remove the two philips head screws.2. Remove the frame around door handle.3. Carefully peel door back by applying outward pressure where the snap on fasteners resist. (see pic for location of snaps)( no snaps at top)4. Lift controls out of armrest being careful to unplug electrical connection(after 1991, there might be extra clips( plastic and steel) holding controls. see last two pics.Use putty knife to push in and release)5. Gently lift door panel up and out at top where gasket meets window. paneldoor handle still in place after panel removalback side of door panelframe around door handlecontrols in arm restcontrols out of arm restFor 1992 plus you might have an extra clip(some people unsnap door panel and reach up from bottom to unfasten metal clip)[URL=http://imageshack.us][/URLLinksDoor Fabric replacement:http://www.nicoclub.com/articles.phpid=175775[i Modified by vancouverbc at 3:02 PM 9/22/2009 Index of all Tutorials


Door panel removal:

1. Remove the two philips head screws.
2. Remove the frame around door handle.
3. Carefully peel door back by applying outward pressure where the snap on fasteners resist. (see pic for location of snaps)( no snaps at top)
4. Lift controls out of armrest being careful to unplug electrical connection
(after 1991, there might be extra clips( plastic and steel) holding controls. see last two pics.Use putty knife to push in and release)
5. Gently lift door panel up and out at top where gasket meets window.



panel


door handle still in place after panel removal

back side of door panel

frame around door handle

controls in arm rest

controls out of arm rest


For 1992 plus you might have an extra clip(some people unsnap door panel and reach up from bottom to unfasten metal clip)


[URL=http://imageshack.us][/URL
Links

Door Fabric replacement:

http://www.nicoclub.com/articles.php?id=175775


[i

Modified by vancouverbc at 3:02 PM 9/22/2009 ]]> vancouverbc 2007-05-28T23:40:35-08:00