Advan Sa3r's fit 17x7 +35 CLEAR 30mm. 17x8mm +35 clear too

Here you can see my 32mm GT-R calipers. There is a 1mm or 2mm gap between caliper and wheel...no need to say that this is really flush...

No need of spacer (wheel turn free) but i will put some 10mm just to be safe in my mind.

]]> ser20det 2009-02-13T22:01:48-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=4467914#4467914 Since this thread is up, the 17x9 +12 Rota P45R clear 30mm Z brakes with a ton of room. Don't have any close up pics of them mounted yet, here's a pic of the wheel though: ]]> biggie 2009-02-13T08:51:22-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=4467905#4467905 Quote, originally posted by TheS13Guy Oh snap! Good catch. Yes they're 16x8 0 offset. Do you have any pics I didn't take any pics when testing them on my coupe (with 30mm Z brakes). I have the pics of the wheels on my vert (stock brakes).With 225/50/16 tires and roll/pulled fenders in rear (slight pull in front now as well, not pictured):Before fender work and alignment (for more neg camber): Quote, originally posted by TheS13Guy raquo;

Oh snap! Good catch. Yes they're 16x8 0 offset. Do you have any pics??
I didn't take any pics when testing them on my coupe (with 30mm Z brakes). I have the pics of the wheels on my vert (stock brakes).

With 225/50/16 tires and roll/pulled fenders in rear (slight pull in front now as well, not pictured):

Before fender work and alignment (for more neg camber):

]]> biggie 2009-02-13T08:47:09-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=4467624#4467624 Quote, originally posted by biggie When did they make a 002 in 16x9.5 I have the 002 16x8 0 offset, they do not clear Z brakes, would need at least 10mm spacer. If that 9.5 is real, then I imagine the spoke design is the same and would have the same issue for clearing them (spokes are too flat/close). Oh snap! Good catch. Yes they're 16x8 0 offset. Do you have any pics Quote, originally posted by biggie raquo;
When did they make a 002 in 16x9.5? I have the 002 16x8 0 offset, they do not clear Z brakes, would need at least 10mm spacer. If that 9.5 is real, then I imagine the spoke design is the same and would have the same issue for clearing them (spokes are too flat/close).

Oh snap! Good catch. Yes they're 16x8 0 offset. Do you have any pics?? ]]> TheS13Guy 2009-02-13T06:52:31-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=4464776#4464776 Quote, originally posted by TheS13Guy Damn it!! I though this would be the forum I can find the answer to my question..Does ANYBODY knows if sport max 002 16x9.5 +0 will clear z brakes Anybody have a picPlease help!When did they make a 002 in 16x9.5 I have the 002 16x8 0 offset, they do not clear Z brakes, would need at least 10mm spacer. If that 9.5 is real, then I imagine the spoke design is the same and would have the same issue for clearing them (spokes are too flat/close). Quote, originally posted by TheS13Guy raquo;Damn it!! I though this would be the forum I can find the answer to my question..

Does ANYBODY knows if sport max 002 16x9.5 +0 will clear z brakes???????????? Anybody have a pic????

Please help!
When did they make a 002 in 16x9.5? I have the 002 16x8 0 offset, they do not clear Z brakes, would need at least 10mm spacer. If that 9.5 is real, then I imagine the spoke design is the same and would have the same issue for clearing them (spokes are too flat/close). ]]> biggie 2009-02-12T12:03:08-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=4462296#4462296 Damn it!! I though this would be the forum I can find the answer to my question..Does ANYBODY knows if sport max 002 16x9.5 +0 will clear z brakes Anybody have a picPlease help! Does ANYBODY knows if sport max 002 16x9.5 +0 will clear z brakes???????????? Anybody have a pic????

Please help! ]]> TheS13Guy 2009-02-11T18:57:17-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=4439997#4439997 ^ and on the third day Kalypso 2009-02-05T21:01:26-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=4439531#4439531 sportmax 504 do not even come close to fitting. help me. i put on the 30 mm alum 300zx brakes and now my wheels dont fit. do the rota d2 18x8 with 25 offset clear that is about the only wheel i like thats 4x114.3 that i like. any input would be appreciated. do the rota d2 18x8 with 25 offset clear? that is about the only wheel i like thats 4x114.3 that i like.

any input would be appreciated. ]]> srpowered240sx 2009-02-05T18:48:22-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=4301969#4301969 Quote, originally posted by jackiechuikei I 3 this thread too!!!and i have a question....17X7.0 FRONT AND 17X9.0 REAR SPORTMAX 962 WHEELS WITH 38MM OFFSET FRONT AND 35MM REARTire 225/45R17 Front & 245/40R17 Rear i think it will clear z brakes, but will it look 17x7 +38 Sportmax 962's will clear with a 5mm spacer. I believe my Z brakes are 30mm, but don't remember checking... Quote, originally posted by jackiechuikei raquo;I lt;3 this thread too!!!
and i have a question....

17X7.0 FRONT AND 17X9.0 REAR SPORTMAX 962 WHEELS
WITH 38MM OFFSET FRONT AND 35MM REAR
Tire 225/45R17 Front 245/40R17 Rear

i think it will clear z brakes, but will it look ?

17x7 +38 Sportmax 962's will clear with a 5mm spacer. I believe my Z brakes are 30mm, but don't remember checking...

]]> DeXteR 2008-12-19T11:22:01-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=3716763#3716763 Quote, originally posted by CRyan Anyone know of Enkei RS_7 with +35 offset clearing They did come off a 300ZX, but making sure with the S14 of mine.If they came off a 300ZX, they will clear the brakes no problem. And +35 offset will fit an s14 just fine... Won't have that flush fit in the front if I remember correctly, but they'll fit just fine. Quote, originally posted by CRyan raquo;

Anyone know of Enkei RS_7 with +35 offset clearing? They did come off a 300ZX, but making sure with the S14 of mine.

If they came off a 300ZX, they will clear the brakes no problem. And +35 offset will fit an s14 just fine... Won't have that flush fit in the front if I remember correctly, but they'll fit just fine. ]]> ElNegro 2008-06-07T08:38:38-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=3716456#3716456 5zigen typhoon 17x8/17x9 +35mm (but im not sure about the offset) Kalypso 2008-06-07T02:26:26-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=3708644#3708644 elite 17x9 w/ +15 offset clear no problem. 30mm z brakes
]]> idahotuner 2008-06-04T11:53:58-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=3374187#3374187 Quote, originally posted by CRyan Anyone know of Enkei RS_7 with +35 offset clearing They did come off a 300ZX, but making sure with the S14 of mine.anyone Quote, originally posted by CRyan raquo;Anyone know of Enkei RS_7 with +35 offset clearing? They did come off a 300ZX, but making sure with the S14 of mine.

anyone? ]]> CRyan 2008-02-12T19:00:43-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=3355640#3355640 Last I heard, the grids do NOT clean the Z32 brakes. duffman1278 2008-02-06T19:09:40-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=3354336#3354336 anyone ahppen to know if the 16x8 +10 rota grids will clear the 26mms clss240 2008-02-06T12:19:53-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=3327805#3327805 Quote, originally posted by Repo Man Steve, this is a great idea for a thread! I'm going to move it to the Wheel forum, as it really belongs there and will be a good resource for a long time to come. Cool. I have more, but I have to find them on my computer, lol. And to the Advans, I'm sure they fit just fine Quote, originally posted by Repo Man raquo;Steve, this is a great idea for a thread! I'm going to move it to the Wheel forum, as it really belongs there and will be a good resource for a long time to come.

Cool. I have more, but I have to find them on my computer, lol. And to the Advans, I'm sure they fit just fine ]]> ElNegro 2008-01-28T17:16:49-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=3327719#3327719 I also added it to the Wheel/Tire/Suspension/Brake forum Table of Contents. Repo Man 2008-01-28T16:50:55-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=3327708#3327708 Steve, this is a great idea for a thread! I'm going to move it to the Wheel forum, as it really belongs there and will be a good resource for a long time to come. Repo Man 2008-01-28T16:45:47-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=3327577#3327577 just wondering do 17x7 +35 super advan sa3r fits 30mm 300zx caplipers burgerwitfry 2008-01-28T16:04:47-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=3313420#3313420 Quote, originally posted by got_chub this is all good stuff but have any of you bothered to look here http://forums.nicoclub.com/zerothread/265282most of this has all been covered already Actually, if you look, that thread was started 3 months after I started this one Quote, originally posted by got_chub raquo;this is all good stuff but have any of you bothered to look here?

http://forums.nicoclub.com/zerothread/265282

most of this has all been covered already

Actually, if you look, that thread was started 3 months after I started this one ]]> ElNegro 2008-01-23T14:40:53-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=3313225#3313225 this is all good stuff but have any of you bothered to look here http://forums.nicoclub.com/zerothread/265282most of this has all been covered already http://forums.nicoclub.com/zerothread/265282

most of this has all been covered already ]]> got_chub 2008-01-23T13:33:55-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=3312866#3312866 Anyone know of Enkei RS_7 with +35 offset clearing They did come off a 300ZX, but making sure with the S14 of mine. CRyan 2008-01-23T11:27:55-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=3233672#3233672 Get some volks son! ]]> s14tan 2007-12-27T01:00:31-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=3233594#3233594 Quote, originally posted by yokota180sx this thread is if your wheels CLEAR the brakestell us when you find out. dont askLol That was my original intention! haha Quote, originally posted by yokota180sx raquo;this thread is if your wheels CLEAR the brakes
tell us when you find out. dont ask

Lol That was my original intention! haha ]]> ElNegro 2007-12-27T00:00:21-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=3233459#3233459 this thread is if your wheels CLEAR the brakestell us when you find out. dont ask tell us when you find out. dont ask ]]> yokota180sx 2007-12-26T22:39:18-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=3233085#3233085 Hi, I would like to add my wheels to see if it will clear the 300zx 30mm brakes. I dont know because im still in the process of getting five lug hubs. So here it is I got some used Work vs ss wheels, front is 18x8.5 + 38 offset, rear is 18x9.5 sorry no pics yet...Let me know if my fronts will clear the brakes....thanks So here it is I got some used Work vs ss wheels, front is 18x8.5 + 38 offset, rear is 18x9.5 sorry no pics yet...

Let me know if my fronts will clear the brakes....thanks

]]> ivorywhite240sx 2007-12-26T20:28:55-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=3232971#3232971 Quote, originally posted by Kansei240sx Z32 N/A wheels on an S13 with 30mm do not clear up front whatsoever. You need a 25mm hubcentric spacer to clear the suspension. The brakes would be plenty clear if the suspension wasnt in the way. The rears clear with no problems suspension and brakes. Mine clears just fine ... I don't have coilovers though... Quote, originally posted by Kansei240sx raquo;Z32 N/A wheels on an S13 with 30mm do not clear up front whatsoever.

You need a 25mm hubcentric spacer to clear the suspension. The brakes would be plenty clear if the suspension wasnt in the way.

The rears clear with no problems suspension and brakes.

Mine clears just fine ... I don't have coilovers though... ]]> ElNegro 2007-12-26T19:56:41-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=3225811#3225811 Leon Hardiritt Standard disk clears GTR brakesWork Emitz HIgh disk clearsWeds Kranze High Disk CLears. Work Emitz HIgh disk clears
Weds Kranze High Disk CLears.
]]> yokota180sx 2007-12-23T20:28:54-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=3225737#3225737 Z32 N/A wheels on an S13 with 30mm do not clear up front whatsoever. You need a 25mm hubcentric spacer to clear the suspension. The brakes would be plenty clear if the suspension wasnt in the way. The rears clear with no problems suspension and brakes. You need a 25mm hubcentric spacer to clear the suspension. The brakes would be plenty clear if the suspension wasnt in the way.

The rears clear with no problems suspension and brakes. ]]> Kansei240sx 2007-12-23T19:54:22-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2609843#2609843 http://www.ichibausa.com/15alwhsp9.html http://www.ichibausa.com/15alwhsp9.html ]]> bluegreens14 2007-04-30T20:58:59-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2609751#2609751 I have a quick question. does anyone know of where i can get a set of 10mm spacers for a 4 lug 240sx I havent had any luck finding a set. Thanks alot! does anyone know of where i can get a set of 10mm spacers for a 4 lug 240sx?

I havent had any luck finding a set.

Thanks alot! ]]> K240 2007-04-30T20:28:30-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2609619#2609619 Quote, originally posted by AeonTorpor What I want to know is what rims will clear the z brakes w/ the SPL brackets. 17" fn01rc's are already cleared. What elsei need to know this as well! and quickly! Quote, originally posted by AeonTorpor raquo;What I want to know is what rims will clear the z brakes w/ the SPL brackets. 17" fn01rc's are already cleared. What else?

i need to know this as well! and quickly! ]]> SlowS13Silvia 2007-04-30T19:48:47-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2599548#2599548 Quote, originally posted by jackiechuikei I 3 this thread too!!!and i have a question....17X7.0 FRONT AND 17X9.0 REAR SPORTMAX 962 WHEELS WITH 38MM OFFSET FRONT AND 35MM REARTire 225/45R17 Front & 245/40R17 Rear i think it will clear z brakes, but will it look I wouldn't run a 2" stagger personally, unless you like understeer Quote, originally posted by jackiechuikei raquo;I lt;3 this thread too!!!
and i have a question....

17X7.0 FRONT AND 17X9.0 REAR SPORTMAX 962 WHEELS
WITH 38MM OFFSET FRONT AND 35MM REAR
Tire 225/45R17 Front 245/40R17 Rear

i think it will clear z brakes, but will it look ?

I wouldn't run a 2" stagger personally, unless you like understeer ]]> nissanman04 2007-04-26T14:32:31-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2599385#2599385 I 3 this thread too!!!and i have a question....17X7.0 FRONT AND 17X9.0 REAR SPORTMAX 962 WHEELS WITH 38MM OFFSET FRONT AND 35MM REARTire 225/45R17 Front & 245/40R17 Rear i think it will clear z brakes, but will it look and i have a question....

17X7.0 FRONT AND 17X9.0 REAR SPORTMAX 962 WHEELS
WITH 38MM OFFSET FRONT AND 35MM REAR
Tire 225/45R17 Front 245/40R17 Rear

i think it will clear z brakes, but will it look ? ]]> jackiechuikei 2007-04-26T13:27:39-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2599143#2599143 Rota D2's in 17x8.5 +25 DO clear 30mm calipers. whiterps13 2007-04-26T11:21:02-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2599076#2599076 I got scared when I saw the word spacer in eds13's post concering S14 SE's. Clawhammer 2007-04-26T10:41:14-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2599072#2599072 I 3 this thread. 240sxautox 2007-04-26T10:39:40-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2598928#2598928 Quote, originally posted by Tarnag40k well if anyone did a 5 lug swap, the bolt pattern on the 300zx and the S14 I believe is that same size,if so then any wheel that fits for the 300zx should clear the calipers, rightAs for wheels I wonder in the O.Z. Ulterleggera's fit I've notice the really light weight on them and are supprised people aren't using them, so how strong are these rims alsoI had them on another car (FWD) that I had, and I liked them. I road raced with them, but never had a problem. I don't know if they clear big brakes though, never tried. Quote, originally posted by Tarnag40k raquo;well if anyone did a 5 lug swap, the bolt pattern on the 300zx and the S14 I believe is that same size,if so then any wheel that fits for the 300zx should clear the calipers, right?

As for wheels I wonder in the O.Z. Ulterleggera's fit? I've notice the really light weight on them and are supprised people aren't using them, so how strong are these rims also?

I had them on another car (FWD) that I had, and I liked them. I road raced with them, but never had a problem. I don't know if they clear big brakes though, never tried. ]]> ElNegro 2007-04-26T09:25:55-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2598827#2598827 well if anyone did a 5 lug swap, the bolt pattern on the 300zx and the S14 I believe is that same size,if so then any wheel that fits for the 300zx should clear the calipers, rightAs for wheels I wonder in the O.Z. Ulterleggera's fit I've notice the really light weight on them and are supprised people aren't using them, so how strong are these rims also
As for wheels I wonder in the O.Z. Ulterleggera's fit? I've notice the really light weight on them and are supprised people aren't using them, so how strong are these rims also? ]]> Tarnag40k 2007-04-26T08:26:44-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2385084#2385084 Any Others ElNegro 2007-02-06T20:39:37-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2364623#2364623 1998 mustang cobra wheels clear 30mm caliper (17x8 30mm offset)enkie racing S 16x7 32offset do NOT clear 30mm calipers, and probably not even 26mm. you need at least an 8 or 10 mm spacer for them to clear. enkie racing S 16x7 32offset do NOT clear 30mm calipers, and probably not even 26mm. you need at least an 8 or 10 mm spacer for them to clear. ]]> Bronze MFP 2007-01-30T13:59:13-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2364385#2364385 isnt there a way to figure out if the wheels clear the brakes other than trial and error elgarvo616 2007-01-30T12:38:58-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2364166#2364166 This is good info. For those worried about flats, Fix-a-flat is your friend. Unless you have major tire damaged..... ]]> amolao 2007-01-30T11:18:09-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2364148#2364148 15 x 7 +0 volk te37's clear the 26mm al 300zx brakes. no pictures, but i've been running this setup for a year now. drunkmonkalan 2007-01-30T11:11:40-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2362624#2362624 You beat me to it, lol. ElNegro 2007-01-29T19:22:23-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2361436#2361436 heres a picture of the s13 se wheels that do and dont clear the 26mm calipers (i did not take this picture, but i dont remember where i got it) ]]> cowboyrps13 2007-01-29T13:20:46-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2361194#2361194 R32 GTR, R32 GTS-T both clearGTR:16x8 +30GTS-T: 16x6.5 +40would get pics but my car is under a foot of snow 2 hours away GTR:16x8 +30

GTS-T: 16x6.5 +40

would get pics but my car is under a foot of snow 2 hours away ]]> nissanman04 2007-01-29T11:22:03-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2360816#2360816 Enkei RS5 17x7 +40 Could use a spacer, but TONS of room.Kevin

Kevin ]]> Dammitboy 2007-01-29T07:54:27-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2359130#2359130 Quote, originally posted by eds13 seriously doubting itThey never do. Usually. I've never, ever seen a set that have. Quote, originally posted by eds13 raquo;seriously doubting it

They never do. Usually. I've never, ever seen a set that have. ]]> Feint of Heart 2007-01-28T15:10:35-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2358856#2358856 seriously doubting it eds13 2007-01-28T12:45:39-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2356316#2356316 Quote, originally posted by nismo_power so no knows if the 15 by 7 enkei mesh will clear or nottokico shocks with tein springs...I doubt they will clear. I'd say no until someone proves otherwise. Quote, originally posted by nismo_power raquo;so no knows if the 15 by 7 enkei mesh will clear or not???tokico shocks with tein springs...

I doubt they will clear. I'd say no until someone proves otherwise. ]]> ElNegro 2007-01-27T08:54:03-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2356306#2356306 so no knows if the 15 by 7 enkei mesh will clear or nottokico shocks with tein springs... nismo_power 2007-01-27T08:45:28-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2356258#2356258 30mm s14 alloys had 15mm spacer in pic but didnt need. 300zx na wheels clear just fine and stern 17x8x34 s14 alloys had 15mm spacer in pic but didnt need.

300zx na wheels clear just fine


and stern 17x8x34

]]> eds13 2007-01-27T07:59:40-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2356107#2356107 i see a spacerQuote, originally posted by ~4N~ Weds Farmas 17x8+8 clears

Quote, originally posted by ~4N~ raquo;

Weds Farmas 17x8+8 clears ]]> yokota180sx 2007-01-27T03:19:18-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2355990#2355990 What I want to know is what rims will clear the z brakes w/ the SPL brackets. 17" fn01rc's are already cleared. What else AeonTorpor 2007-01-26T23:33:26-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2355888#2355888 Whats with all the wheels with terrible offsetsAnyways,Mine are 17*8 +20 Anyways,

Mine are 17*8 +20 ]]> ILikeMy240sx 2007-01-26T22:16:21-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2355882#2355882 Quote, originally posted by Hellngo15 when i get brake upgrade for my s13 it has abs does it matter what kind of 300zx brake caliper i getNo Quote, originally posted by Hellngo15 raquo;when i get brake upgrade for my s13 it has abs does it matter what kind of 300zx brake caliper i get?

No ]]> ElNegro 2007-01-26T22:14:10-08:00 http://forums.nicoclub.com/zerothread?id=223218;postid=2355784#2355784 when i get brake upgrade for my s13 it has abs does it matter what kind of 300zx brake caliper i get Hellngo15 2007-01-26T21:08:03-08:00