Greddy S14 KA intercooler kit (FMIC)?

[CodeWhore]

Is anyone running Greddy S14 KA FMIC kit, either with Greddy turbo kit, or with a custom setup?

I need help figuring out pipe routing for mine... it didn't come with any instructions.

TIA!

[Structure240sx]

shouldnt be too hard. just kind of put different pipes in different places til it looks right.

[bruinbear714]

I'm running the Greddy FMIC kit with a custom turbo kit. The piping is a PITA to figure out, but it'll work only 1 way.

[yelnatsch517]

I'm running the Greddy FMIC kit with a custom turbo kit. The piping is a PITA to figure out, but it'll work only 1 way.

Can you post some pics?

Hmm... nice avatar. So where is this place you live?

[CodeWhore]

I'm running the Greddy FMIC kit with a custom turbo kit. The piping is a PITA to figure out, but it'll work only 1 way.

Yeah, piping is a PITA to figure out. My kit didn't come with any instructions, so I don't know even if I have all the pieces... Do you at least have instructions / part list?

Pictures would be great!

Did you have to cut anything on the car to make it fit? Does the battery need to go into the trunk? Did you make a custom hot pipe to fit it, or did one of Greddy's SR hot pipes fit?

Thanks!

[okis14]

It's pretty simple.Here is a picture of the S14 GReddy FMIC Piping for the SR. I have it lined up as if your sitting in the car. It's only 3 pipes. The Cold Pipe will go through the Battery Tray so you'll need to relocate or get a smaller battery and move it to the side. The KA piping "might" not go through the battery tray and may run like the FMAX piping.You'll have to make the a hotpipe to fit into the Greddy hotpipe or if your turbo is in a similiar loaction as the Stock SR then you could use an aftermarket hotpipe.

I have the FMIC in my car using the FMAX kit with it's piping. I had to slightly modify the cold pipe to make it fit right. You can see my piping at http://okifx.dynu.com:8383/driftMy pictures aren't directed at the piping alone but you might get a good idea on how to run yours.

[Red-KAT]

I have the S14 KA kit on mine...

It was easy to put on.

I'll make sure some pic's are in the Cardomain...

EDIT: Yup there are enough pics in my page to make it easy for you.

[CodeWhore]

Thanks a lot! Got it it all figured out from Red-KAT's pics.