Wiring Specialties - Pre-Made wiring harnesses, Brand NEW!

[Wiring Specialties]

The S14 to S14 are to be done this Summer. We'll keep everyone posted.

Also, check the site for updates.

Thanks
Yury

[PyR0NiAk]

Still says middle of june for the S13 -> S13... This mean they might be shipping this week?

[PyR0NiAk]

OM3GA? Yury? Anything? I need to get my car inspected before they'll approve my leave request. This is the one thing I'm waiting on. If I need to pay a little extra to express ship it, let me know.

[OM3GA]

Hey Bud, Sorry i have not been in the SR section for a little bit. The harnesses should be arriving anytime and will go out immediately, since this is the first batch everything is being checked over multiple times. Sorry for the hold up but i am sure you will be VERY satisfied when it arrives

[OM3GA]

Guys and Gals,

This is as an update to the pre-order of the Wiring Specialties S13 to S13 harness that was placed over the last few weeks.
We understand that the delays we encountered with shipping our product from the factory and getting the harnesses to everyone has been a frustrating inconvenience and we greatly appreciate your patience through this.

We finally received confirmation on the container shipping from our freight forwarders and are happy to report that the shipment is due to arrive in NYC right around the 4th of July holiday. Clearing customs should take a few days and then we will be very busy shipping the product out to everyone.

I want to also reassure everyone that as soon as the harnesses arrive at our shop after clearing customs, we will be rushing all the pre-order items out as soon as physically possible.

Again, thank you for the patience in waiting for our harnesses and again, our apologies for the delays.

Thanks,

Wiring Specialties
508.274.0464

[Wiring Specialties]

Chris, shipping the harness to you Tuesday. I was able to airship a few harnesses to get a couple of customers up and running.

Post some pics and some fun details.

[PyR0NiAk]

Awesome. I got your email as well. Also sent a reply. There will be a full review on this harness as soon as it's installed, as well as before and after pics.

[OM3GA]

Can't wait to see the review Chris!

[PyR0NiAk]

Can't wait to see the review Chris!

I can't wait to install it and start my car OUT OF LIMP MODE.

Tracking says it'll be here tomorrow...

[OM3GA]

Yeah limp mode is no fun.

[homeslicej2]

I hate it when it's limp...wait, did I say that out loud? Anyway, when will the S13 SR lower only (transmission) harness be available separately?

[OM3GA]

That is not available seperately yet, keep a look out.

[email protected]

[PyR0NiAk]

wiring-specialties-s13sr-into-s13-wirin ... 99770.html

[CRyan]

i need ze S14 to S14 harness!!

No rush, perfection takes time.

[Wiring Specialties]

Indeed. If you really think about it, each harness has about 20 unique connectors. We are sourcing all the key components (i.e. ECU, interface and injector) from OEM manufacturers. Most of the, don;t take order less than 5000...
Moving along well. Just secured a batch of the S14 Zenki/RB/CA ECU connectors from the manufacturers. Should be in line with the production goals...

We'll keep all posted.

Thanks
Yury

[Wiring Specialties]

Hi all,

Just wanted to reach out to our fellow Nico members for some help.

Below is a picture of the Brown dash connector on the 1991-1994 240sx. If you have one or more, we need a bunch of them for development.

Please email Yury at [email protected] so we can pick a few of them up.



Thanks again everyone.

[boosted3tc]

i got a question.....im putting a sr20 into a 82 corolla, gonna leave it all factory. what will need to be done with harness and ecu? and could u make me a direct plug harness?

[Wiring Specialties]

Bump
The following pre-made harnesses are in stock now.

S13 SR to S13/S14 engine swap harness.
We also have many transmission pre-made harnesses available now including...
- S13 SR20DET to S13/S14 240sx
- S14 SR20DET to S13/S14 240sx
- RB20DET to S13/S14 240sx
- CA18DET to S13/S14 240sx

[Wiring Specialties]

The RB25 to S13 harnesses are finalized and we are going to production,. Phew... long time fighting connectors. S14 Sr to S13 chassis and S14 chassis are also ready to go.
Stary tuned to the pre-order dates.

[Wiring Specialties]

Finally, big news.
We got all the details lined up for the production of the RB20 and RB25 to S13 harnesses.
Delivery date is set for late November.

Here are the links to the pre-order page: http://wiringspecialties.com/wsrehasrandr.html

Picture of the RB25DET into S13 harness. More pictures on the site


Thanks for all the support guys.

Yury Lyalko
Wiring Specialties

[Wiring Specialties]

Guys/Gals,

We are pushing forward with the CA18 development into the S13 chassis. Any thoughts?
We have not gotten too much action with this idea, so i wanted to hear some ideas to better understand the QTY we should make.

Almost all of the CA18 harnesses we see at the shop are in terrible shape, so replacing one with a new set make sense, but need more feedback.

Thanks
Yury Lyalko
www.WiringSpecialties.com

[CRyan]

S14 to S14 SR engine harness YET?!?!?!

Engine is coming out at some point this winter and I already know this would be an amazing addition to my "clean up" detail!

[Wiring Specialties]

Yep, got the S14 to S14 done, but the only 2 final prototypes are sold to local customers. The main order will be done later this year though. Sorry... It will be worth the wait though, just like the other units we got.

Thanks
Yury

[youngfab59]

Are these pre-made harnesses still being made? I'm looking for a S14 Kouki SR to S14 harness.

[Wiring Specialties]

Absolutely! We are actually moving towards all pre-made harnesses. We have S14 Sr to S14 pre-made harnesses on route right now that will be available in June. They are almost all sold out thought on pre-orders so if you are interested let us know quick.

You can email us at [email protected] for pre-order info.

[soldi3rappl3]

shipping was fast! ordered it yesterday and got here today! did not try to hook everything up yet though.

[Wiring Specialties]

Glad to hear it got to you so quick. Hope you enjoy it and if you have any questions, please do not hesitate to call or email us.

[PyR0NiAk]

Ordered my new COMPLETE set (only had an upper, previously) this morning. It'd be awesome if it shows up as quickly as soldi's did. If so, I'll have it installed tomorrow with some fresh pics.

[Wiring Specialties]

Should arrive any day now. Soldi's quick arrival was a surprise to us even.
We would love to see some pictures when you install it!

[PyR0NiAk]

Should arrive any day now. Soldi's quick arrival was a surprise to us even.
We would love to see some pictures when you install it!

Got them installed. I extended the injector wires when I put the deatschwerks plugs on them so I could run them from under the manifold. The only complaint I have was the fact that the wrong plug was on the battery cable on the transmission harness. (The red one where 2 connectors hook up.) It's a bolt on connector, so I swapped it with the one from my stock transmission harness. Otherwise, it looks great. Has everything to hook up for any situation. (Automatic to manual swap, Automatic tps or manual tps, z32 or stock mafs, and dash connectors for pignose or chuki.) All in all, I like it and definitely recommend them to anyone.