Just wanted to let you guys know that we at JPN Garage worked with BC coilovers and developed a coilover system specific for the Datsun 1969 to 78 S30 Z lineup.

Its a full coilover system with camber plates on all 4 corners, They come with 5K front and 4K rear but you can request custom ratios for free.

You can also add swift springs for $320

http://www.jpngarage.com

Are these full bolt on or is there some fabrication still to be done? I see that the camber plates have 4 studs so there's fabbing there for sure. I am curious about the tubes themselves. These kits come with spindles already attached or do we cut our existing tubes and weld the assemblies in?

The coilovers have to be welded to the bottom of the actual shock body, the 4 bolt camber plate is an option, the kit comes with a 3 bolt camber plate

Ok, cool. Have to make a decision as to which kit to order. I have Ground control in now but I'm looking for more adjustment and better strut quality. Ordered some flares from you guys. Glad you're in business. Like your products.

Were very glad your happy with our service.

BC coilovers is one of the best in the market and there warranty is outstanding plus you can upgrade your BC spring ratio free of charge.

Let me know if we can help.

Thanks mangs!

One more question, with the direct bolt in camber plate, 3 stud, will I be able to get at least 1.75 degrees of Negative camber?

Thanks again.

Speedgato wrote:Thanks mangs!

One more question, with the direct bolt in camber plate, 3 stud, will I be able to get at least 1.75 degrees of Negative camber?

Thanks again.

Yes sir there good till -2 and +2

Let us know if we can help

JPN Garage INC
(407) 600-7911