Raise the Versa (hatchback)...

The Nissan Versa Tech Discussion forum is the place to discuss Versa performance modifications and maintenance.
User avatar
*Ziggy*Stardust*
Posts: 7
Joined: Mon Apr 02, 2012 11:20 am
Car: 2012 Nissan Versa Hatch Back 1.8 S
*current status: All Stock
Location: Tooele, UT
Contact:

Post

:wtf2: Is probably what you are thinking.

Well I've always been one to do things different, opposite of the "norm."
I was wondering if any one had info, or could direct me somewhere were I could find out what it would take to raise my car 1-2 inches higher.
I'm going to do a photoshop of it to see if I would like if or if it would look just plain stupid.

Later... :wavey:


User avatar
Promise Land
Posts: 1828
Joined: Tue Mar 10, 2009 6:52 am
Car: 2011 Nissan Versa
2001 Chevy Suburban
1992 Ford Mustang
Location: Sprague River, OR
Contact:

Post

Longer springs would raise the car but you would be close to running out of travel on the struts/shocks. You'd want to replace them also and I don't know anyone making longer sets of those. Perhaps you could do it with a set of coilovers.

future_stx_cube
Posts: 56
Joined: Mon Mar 01, 2010 4:45 am
Car: 2011 metallic blue versa s hatchback


(imo, just fyi, omg im super sarcastic and only tease online and in real life. if you take offense take deep breathes and relax im just joking!)
Location: Robstown, tx
Contact:

Post

ya just out of randomness.. but why would you want to raise your versa?

User avatar
*Ziggy*Stardust*
Posts: 7
Joined: Mon Apr 02, 2012 11:20 am
Car: 2012 Nissan Versa Hatch Back 1.8 S
*current status: All Stock
Location: Tooele, UT
Contact:

Post

One reason to raise it is because it's low enough that in a few places that I drive the front end scrapes (so then I of course angle the car and take my time through so I won't scrape). 2nd is I'm not a fan of lowering the car. "Everyone" lowers a car, I want to be different, and plus I've seen some other cars out there raised and they looked pretty cool.

User avatar
AJVersa
Posts: 85
Joined: Fri Jan 20, 2012 8:08 pm
Car: 2009 Nissan Versa S Hatchback
Location: Arizona

Post

You could try a set of spring spacers. I don't think they are a permanent solution, but they're cheap enough to try. What about larger diameter tires? 185/70x15, or 185/65x16 ???
You could be the first "Monster Truck Versa" :chuckle:
http://www.jcwhitney.com/coilspring-adj ... c11305u0j1

User avatar
*Ziggy*Stardust*
Posts: 7
Joined: Mon Apr 02, 2012 11:20 am
Car: 2012 Nissan Versa Hatch Back 1.8 S
*current status: All Stock
Location: Tooele, UT
Contact:

Post

LOL! "monster truck versa."
I'll see what I can do. So those tire sizes, I assume they would be closer to the wheel wells and taller?

Thanks to everyone who has given their input. :dblthumb:

User avatar
AJVersa
Posts: 85
Joined: Fri Jan 20, 2012 8:08 pm
Car: 2009 Nissan Versa S Hatchback
Location: Arizona

Post

There is plenty of room in the Versa wheelwell. Look at the tire sizes guys are running.
A tire diameter more than 25 inches will throw your speedo off, but it will raise your ground clearance. My advice is to stick with what you've got, and slow down on rough roads.
Good Luck!

User avatar
*Ziggy*Stardust*
Posts: 7
Joined: Mon Apr 02, 2012 11:20 am
Car: 2012 Nissan Versa Hatch Back 1.8 S
*current status: All Stock
Location: Tooele, UT
Contact:

Post

:cool: That is a good point on sticking with what I've got. Plus it'll save me a lot of money if I keep it the same height instead of trying to raise it etc. Maybe I'll learn some patience on taking it easy on the dips and driveways that I know are issues. :cool:

RobJordan
Posts: 57
Joined: Sun Nov 27, 2011 1:20 pm
Car: 2011 versa 1.8 Hb 6spd
Location: Gallatin, Tn

Post

Or you could put some 18/ 20's on there like the old impalas i have down the street.. First dub versa... I know im delirious.. on the fumes from down the street.

User avatar
*Ziggy*Stardust*
Posts: 7
Joined: Mon Apr 02, 2012 11:20 am
Car: 2012 Nissan Versa Hatch Back 1.8 S
*current status: All Stock
Location: Tooele, UT
Contact:

Post

HA! That would be a site to see. A dub versa! Maybe I'll photoshop it. I'm curious.

RobJordan
Posts: 57
Joined: Sun Nov 27, 2011 1:20 pm
Car: 2011 versa 1.8 Hb 6spd
Location: Gallatin, Tn

Post

Yo tambien. Me as well... post it if you get a chance.

RobJordan
Posts: 57
Joined: Sun Nov 27, 2011 1:20 pm
Car: 2011 versa 1.8 Hb 6spd
Location: Gallatin, Tn

Post

So a few projects going on. I have a LW crank pulley, rims no tires, nav/sirius tuner and head unit, carpet pulled and some gtmat put down so far... how is your dub shop versa looking?

User avatar
Skyes_2012_RedV
Posts: 3
Joined: Fri Aug 10, 2012 1:08 pm
Car: 2012 Nissan Versa Hatchback 1.8 S Red Alert
Location: Tooele, Utah

Post

Haven't done any photoshop. Plus I suck at it. Maybe I will try and find someone to do it for me. (by the way i used to be *ziggy*stardus* had to change my account)

RobJordan
Posts: 57
Joined: Sun Nov 27, 2011 1:20 pm
Car: 2011 versa 1.8 Hb 6spd
Location: Gallatin, Tn

Post

oooooooh ahhhhhh... control knobs hmm.... I should look for those. I was looking for a short throw shifter as well. Shoot me a message sometime with plans and mods. Id love to hear bout them. I should have some pics soon.

User avatar
Skyes_2012_RedV
Posts: 3
Joined: Fri Aug 10, 2012 1:08 pm
Car: 2012 Nissan Versa Hatchback 1.8 S Red Alert
Location: Tooele, Utah

Post

RobJordan wrote:oooooooh ahhhhhh... control knobs hmm.... I should look for those. I was looking for a short throw shifter as well. Shoot me a message sometime with plans and mods. Id love to hear bout them. I should have some pics soon.
I bought the knobs on ebay, and luv them. I am unable to shoot you a message because of my lack of participation. :(


Return to “Versa Technical Discussions”