Update cars inside nowI have chosen to upadate this as it just seems to keep happening to me. i have a 94 gts type-m,my problem is this,i had the car completly dismantled and shipped to my house in what i thought was easy to move shipping crates, for the most part they were, engine\tranny no problem,susp,wheels,brakes easy.but then the chassis showed up, and its in a 20x10 shipping crate tied down siting on the frame, the whole long as boat ride,and the fenders,hood,trunk lid,etc. are scatterd about and i have no way of geting this f-ing thing out, cuz my driveway slants the wrong dawm way, uphill batle.i want to use wheel dollies and a whinch,but there is about 2-3inch drop at the door of the crate,i wish i was home when they droped this dawm thing off, help,flame,watever ps i have no friends that i trust to keep my baby a secert

06,12/the engine is dead.I took the head off and wanted to cry some thing want very wrong in this thing.thers holes in cyl 1 and 3. One rod was just staring at me,no piston no pin. I think that i made a horrible mistake in going it to this,and now I wish I that I had just waited for a better or different car, because I'm way over my head,

Hey wile c. No no Not on my r32, or do u mean on the crate? Btw u ever catch that bird.

I don't catch the bird on purpose. If I catch him, then what?

Chop it man, don't be a wussy! i chopped my 30!

deconstructing-skyline-or-when-nissan-m ... 40090.html

Yours old and busted mine is in good shape I just can't pull a 1900lbs chasis uphill. About 55 feet no wheels

I'm a pretty clever SOB. Can you post a pic of the driveway and the shell so I can fully appreciate the situation? I'll start my gears turnin.

My dad in all his wisdom told me this, "put the dawm wheels on and roll up the dawm driveway."so how am I gonna push it up the dawm hill "use the truck dummy". So that's what I plan on doin

You owe your dad a beer. Consult him in the future, you fell far from the tree youngun.

Tell me about it I spent a while trying to figure this out, I'm not young but I'm not old ether, just had a real newb moment,now what to do about the crate???

FORT!

Not a bad idea

Pulleys.......

I'm gonna make a luxary deer blind, with sterno stove,chem toliet,dtv,solar powered coolers,

Bad engine, lack of tools, but she sure is pretty.dented dinged scraped,but pretty

Put a KA in it

In a skyline, I could not in good faith do it, I want to swap a vh but I'm out of funds till tax time, so gonna just sit here think before I do any thing else.

I would. That would be fun just to piss people off.

I still have scares from when I put a ka in a z31, but something will find it's way in there,ka's are pretty cheap, but it feels wrong

Wrong? Next you will say you don't want to make out. If my 180 was an SR20 I would KA swap it. Yes, purely to make people mad. Nothing wrong with the SR, just ome of their owner's attitudes. Ok, the valvetrain design is dumb, but other than that.

I stick with TMS, listen to your dad, put wheels on and push. A chasis with no engine or drivetrain, fenders, hoods, etc is really light. If you can't push it up the drive, You could ratchet strap winch it up the hill a little at a time placing a chock under the wheel after each stop.

I got it in my shop, I had to rebuild every thing sus,lca,uca, knuckles, steering rack brakes every thing to make it roll and steer. Now I got real problems. Like why the hell did I have to have this dawn thing dismantled, then shiped. God help me

God drives a Toyota.