Hi every one.

Before I'm harped on, I HAVE used the search function to look for my answer, but nothing conclusive has come up.

I have a 1996 Nissan President, which to my knowledge is essentially the exact same thing as am infinity Q45 but with different body panels. I have a set of Nissan Skyline GTR/ GTS-t type M front brake calipers that I would like to mount to the car, but I'm unsure if they are bolt on. Everything I have found has details pertaining to 300zx n/a and 300zxtt. Does anyone here know if the calipers I have are a direct bolt on?
I need new disks up front and would love to upgrade at the same time if it's possible.

Cheers!

to NICO!

The skyline is pretty rare here... I'm not sure if anyone here has tried to bolt Skyline brakes on to a Q45 before. You may get to be our test case! Do they look close?

Heath

Funny you should mention this because I have been running R32 GTR front brakes for about a week now. If they are R32 GTR or R33 GTS-t calipers they are bolt on. The problem is rotors which are expensive or have to come from europe or japan which is about a month to a month and a half wait.

Right now I'm just running the front calipers, I will be going with Z32 rear calipers when I get money in since after the track day at laguna seca I have a cracked rear rotor. Here are the caliper +rotor specs:

R32 GTR(89-93):
4x40mm piston
296x32mm rotor

Z32 TT(90-96):
4x40mm piston
280x30mm rotor

Q45(90-96):
2x43.2mm piston
280x28mm rotor

Bolt pattern is the same for all of these calipers. The R32 GTR spec-v brembos as well as the R33 Brembos do bolt up but are way too expensive, better of with Evo 8/9 calipers and rotors. If you need rotors your best bet is EBC since they are the most cost effective. I got EBC GD1226's for $250 shipped which are slotted and dimpled, you can get plain rotors as well.

Awesome info!