Need RB26 Valve lash shims

[boostedh23a1]

Nissan part numbers pn followed by thickness
(1) 1322905u72 2.98mm
(2) 1322905u69 2.935mm
(1) 1322905u70 2.950mm
(3) 1322905u64 2.86mm
(2) 1322905u65 2.875mm
(1) 1322904u19 3.310mm
(1) 1322904u17 3.28mm

thats 11 (grabbing one of the slightly smaller ones incase the big one is too big.)
Can anyone get these?

[Ramius83]

www.precisionshims.com.au

[boostedh23a1]

12.3 diameter or 11.5? I measured one and it was 12.1 if memory serves me right. Car is at my shop at the moment.

[Ramius83]

I am not sure, engine is installed and can't measure them. If you email/call them, he will tell you what size he always uses for RB26s......He never asked me when I ordered mine, twice.....

[boostedh23a1]

Probably the 12.3. How. Long did it take to get them?

[julio]

12.3mm is the correct size. I only have shims that will satisfy the 2.875mm sizes, none of the rest. Its probably easiest to get them all from precision shims. I ordered some from Japan and then some from them and the ones from aussie land came first.

[gawdzilla]

good to know you can buy these now. when i shimmed my motor back in the day i made a spreadsheet with all the thicknesses needed vs. what I had. Then mixed and matched all 24 shims to get whatever I could to fit within spec, then took about half of them to get ground down at a machine shop. Obviously you can't add thickness if you need to, but it ended up working out well for me.

[boostedh23a1]

bah! got them in today all are in spec now except for 2.. son of a b****.