KA24DE transmission Bolt Size

[DevilMB3017]

I feel dumb for asking such a stupid question.

This is for a KA24DE manual transmission.

I checked the FSM, and it only had bolt LENGTH. Not the size of the bolt/head/shank whatever it's called.

I need the size of the threads and bolt head if you know it. I assume all the bolts are the same width, even though the FSM says different lengths are required.

[bone_stock_240]

I am not sure about the thread and pitch of the bolts. If you want, I can send you a complete set I have for free, if you pay for shipping.

[DevilMB3017]

Thanks a lot man. I have someone local who might have a set, I'll let you know ASAP.

[cleantune]

Sry, I know it is a really old post, but I could not find thread pitch and size anywhere and I figured it may be helpful to someone who may need it one day.

The Ka24de transmission-to-engine bolt thread and pitch is 10mm 1.25 x (length needed)

Bolts from FSM: [ bolt order clockwise from right edge of starter if starter is on left of transmission
(looking into bell housing): #1,#1,#1,#2, #4, #5, #3, #3, #1 ]

#1-four 60mm length
#2-one 70mm
#3-two 35mm (w/ nut)
#4-one 65mm (w/nut)
#5-one 25mm

[corey121]

Sorry I dont know how old the post its nor do i care, But i have found that the bolt size listed above was incorrect on my Ka24de it was


M10 x 1.50