jdm skyline 350gt how to upgrade to brembo oems

Post by **ke70 sr20det** » Thu Dec 30, 2010 4:32 pm

hi i have a bone stock nissan skyline aka infiniti g35 2door

my car is with full options except brembos that comes in infinti

what things ill be needing to convert only calpers or ill be needing discs too

complete noob

Post by **RED_DET** » Thu Dec 30, 2010 10:00 pm

You will need calipers, caliper bolts, rotors & pads. Your dust shields will also have to be modified (cut) in order to accept the larger rotor. Everything is a direct bolt on.

Post by **ke70 sr20det** » Fri Dec 31, 2010 3:03 am

i can like get it for half from ebay on used oems thanks....any difference in braking

Post by **RED_DET** » Fri Dec 31, 2010 11:01 am

100% better braking, one of the best upgrades I have done.

Post by **Sergio@ocinfiniti** » Wed May 21, 2014 1:40 pm

One of the guys I work with did this same mod but ended up selling his set but all he did was a full swap, rotors, calipers, and brake line. Other than that everything bolts up perfectly!

Post by **audtatious** » Thu May 29, 2014 8:17 pm

I'd suggest going Akebono instead of Brembo....

http://www.infinitig37.com/akebono-big-brake-swap.html

Step 9 and 10 of this page shows how to cut the dust shield: http://www.370zcoupe.com/install-akebon ... -350z.html

jdm skyline 350gt how to upgrade to brembo oems

jdm skyline 350gt how to upgrade to brembo oems

Re: jdm skyline 350gt how to upgrade to brembo oems

Re: jdm skyline 350gt how to upgrade to brembo oems

Re: jdm skyline 350gt how to upgrade to brembo oems

Re: jdm skyline 350gt how to upgrade to brembo oems

Re: jdm skyline 350gt how to upgrade to brembo oems

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums