I am located in Barrie Ontario but am willing to pay shipping as i am having a very hard finding one local.

Thanks

This is the most common item for sale on the first generation Q45. I think I have one buried somewhere but am unsure. Ebay has plenty. or car-part.com. Very easy to find with a simple search VVVVVVVVVVVVVVVVVVVVV

well if you find yours and want to sell it let me know.

As I see on ebay the going rate is $90. With shipping were looking at around $110. I REALLY don't want to look through the compilation of parts I have in that corridor but if I find it I will honor that price. If you have a driverside window regulator and front right caliper for my Q I would trade. I am suggesting you try Felton Auto in Snohomish WA. They have been the best used part stash for nissan/infinits I have found in the Northern Hemisphere.

If you post some pictures of your 36 I would seriously consider digging through my crap pile!!!!!!

I Thanks for the advise, I would like to avoid a cheap ebay one as I have heard nothing but bad things about them, unfortunately I have no q parts. I can throw up a few pictures of the car for sure tho.

Thanks!

Unfortunately I am retarded with computers and can not get pictures to post on this forum. Tried what they taught me in highschool computer class but I must have done it wrong haha. If you have an email address I will gladly send you some.

I have 5 in my garage to sell on ebay whenever I get around to cleaning them. I usually sell them for about $135.00 on there. The price keeps going up as the junk yard inventory depletes. The pull-a-part in Atlanta used to have 5 or 6 Q45s at a time at each of their 3 locations, but now you're lucky to see one at one or two...

Heath

I guess I'm lucky in the SF Bay Area because at any given time there are at least ten to twelve 90-96 and engines are always complete. Throttle bodies are $44 at the san jose pick-n-pulls where I normally go.

If you have a driverside window regulator

sorry to thread jack, but if it were me I'd definitely get a new one. They are a big improvement over our 1st gen G50 window regs. My passenger side went out Christmas Eve and after a little research I spent the coin on a new one (and probably will never have to worry about it again) - the plastic guides are at least twice the size of the old ones and from what I can tell is the first part to fail on the old ones.

The change in the plastic guides was midyear or during a year change. So my 94' actually had the smaller guides. I got a window regulator out of a late 94 or 95 that had the bigger guides. I don't know if there is a way to look up when the part number was superseded by the new one. So try and get a 95-96 regulator, but you can still get a brand new one for not that much, something like $150.

I got a window regulator out of a late 94 or 95 that had the bigger guides.

You are exactly right, the 90-94.0 reg was discontinued - so the new part I ordered that supercedes it is the 94.5-96. Fit perfectly too I might add.

There's a 95 Q at a local pull it yard, I'm going to check it out to see if it still has them!