Got my S-TEC Manifold too!!

[sickness14]

how did it turn out?

[Cjmartz2k]

how did it turn out?

x2 & Pics!!!

[meet07]

Here is the finished product running and all:




The turbo, ebay special gt35 witha .68 turbine side:


Seeing full boost from like 3500-4400 in 5th. something like that

Custom powersteering resivoir:



Custom DP and fab work. My boy RJ hooked it up:



Wastegate 50mm tial knock off:



And the manifold from diff angles:

[meet07]

Oh yeah and Nistune is the best thing since sliced bread. Not sure why nissan didnt run blow through from the factory...

[Cjmartz2k]

Good lucking engine bay mang Looks like plenty of room for the WG. It doesn't even look like you had to mod the manifold--really clean. Did he use his own tubing to make the WG runners or just chop and rotate?

[meet07]

He did use some material to message it down from the 2-1 WG elbow transition. Besides that it fits nice. Sounds good when she cracks open too...

If you havnt seen, Im having that issue with the 25 breaking up above 10psi... Might have my hands on a new set of lsx truck coils...

[DKSA]

Hi there! i am trying to get hold of s-tec! my emails are not being replied to nor is the phone number i got from another forum being answered? Is he still running business?

[Cjmartz2k]

Hi there! i am trying to get hold of s-tec! my emails are not being replied to nor is the phone number i got from another forum being answered? Is he still running business?

PM me your email addy

[meet07]

[email protected]

Car has to undergo a rebuild.

[gmac708]

[email protected]

Car has to undergo a rebuild.

what happened?

[Cjmartz2k]

[email protected]

Car has to undergo a rebuild.

what happened?

x2

[meet07]

Car was never right after my last trip to the drag strip. Run after run with antilag, no breaks in between runs and 2 stepin at 80mph. Might of had something to do with. And im not sure if you guys remember but i was having a issue with the cas reading 15 degrees with the cas all the way ccw? Not really sure cause i havnt tore it down but cylinder 2 is showing 80psi and she is smoking white/ blue smoke. We all know what that mean so im unsure what route im gonna take now

[DKSA]

Hey Meet, still no word from S-tec myside..
how does one get hold of him?

[Cjmartz2k]

PM me your email. I'll give him a call for you.

[meet07]

^^^^ what we do without ya?

[Yellow4g63]

Car was never right after my last trip to the drag strip. Run after run with antilag, no breaks in between runs and 2 stepin at 80mph. Might of had something to do with. And im not sure if you guys remember but i was having a issue with the cas reading 15 degrees with the cas all the way ccw? Not really sure cause i havnt tore it down but cylinder 2 is showing 80psi and she is smoking white/ blue smoke. We all know what that mean so im unsure what route im gonna take now

Forged pistons and maybe rods. Btw do you remember how much u paid for your Lightning maf? I just found out there are 2 different kinds of them .

[Cjmartz2k]

^^^^ what we do without ya?

LOL, I guess I should start charging him what he's paying his JDM secretary to do How long do think until it's up and running again?

[meet07]

i purchased mine off of ebay brand new for like 70-80 bucks or so.

[Yellow4g63]

i purchased mine off of ebay brand new for like 70-80 bucks or so.

Ok you got lucky I must have a crap one. Those are the Granatelli ones, from what someone said some work some don't lol. I got the one that didn't work.

[DKSA]

^^^^ what we do without ya?

LOL, I guess I should start charging him what he's paying his JDM secretary to do How long do think until it's up and running again?

damn straight!!!!!! im sure he must be losing lots of business from that!
only reason i am persisting with this is because i dont know of another twinscroll manifold for RB25 at this price.

[Cjmartz2k]

Did he email you yet?

[DKSA]

no...

[Cjmartz2k]

I just spoke with him and he said he's emailed you several times now with no reply. Might want to check your junk mail settings. Either way, he said he's out of the top mounts right now, and it's going to be a few months minimum before he gets new ones in. He's having them tweaked to angle the flange away from the valve cover a bit. It'll make a bit more room for ginormous turbos

[DKSA]

very very very strange.....
i check my junk mail folder everday aswell....
havent reieved ANYTHING from him?
is he positive that he has my address correct?
i will PM you another email address that he can cc to...
but ya, nothing from him, and i get emails from ppl every day

[Cjmartz2k]

Hmm, maybe he's getting the addy wrong. Like I said though, he's out of them right now and it's going to be a few months minimum, so I'd try him back then.

[ST240]

Jeez that thing looks like it makes the turbo fit awful high.... I already have serious hood clearance issues .

[DKSA]

anybody know anything about these manifolds?

http://cgi.ebay.com/ebaymotors/Skyline- ... ccessories

[ST240]

Cjmartz2k,

Know if he will be running off another batch of these things in the near future?

[Cjmartz2k]

He said he was planning to, but I haven't talked to him in a couple weeks. I've been pretty busy with work. I'll give him a call soon and see if he's got any updates. I can almost assure you though that nothing is going to happen in the next few weeks.

[ST240]

Thats fine... But by the end of next march would be cool tho .