Looking for instructions on how to replace the cabin filter on my FX35. It's located behind the glove compartment, but I don't see a simple way to gain access. Looks like the whole glove compartment must be removed.Thanks.
Jim
FX35 cabin filter install instructions
-
GixxerSteve
- Posts: 43
- Joined: Wed Dec 13, 2006 7:47 am
- Car: 2004 Infiniti FX35
2003 Infiniti G35
Re: Bump (jmillet)
Well if you haven't aready done this, I replaced mine with the directions that came with the new filter (Bosch). You have to remove the panel underneath the glove box, then you have to remove the glove box itself. It is behind that. I think the panel has a few (3) screws, and the glove box may have some too.
-
GixxerSteve
- Posts: 43
- Joined: Wed Dec 13, 2006 7:47 am
- Car: 2004 Infiniti FX35
2003 Infiniti G35
-
GixxerSteve
- Posts: 43
- Joined: Wed Dec 13, 2006 7:47 am
- Car: 2004 Infiniti FX35
2003 Infiniti G35
Re: Thanks (jmillet)
Yep, a good forum for FX owners.
-
00_Altima MD
- Posts: 289
- Joined: Tue Jan 21, 2003 6:58 am
- Car: 2004 Sentra SE-R Spec V
there are a total of 6 screws that hold that glove box in get the 2 on the bottom one on each side then pull the four out from the top pull down on the glove box the lower panel will pop out when you do this and then you will see a white box with a door on it pull on the tab to the right and it will release and there is your incabin air filter. install in reverse order