2010-2011 Altima Coupe Fog Light Housing!

[Eric Noa]

Hey guys I've been looking for the fog light housing only but I can't find them... I have only found the OEM with the lights included....If anybody know's where I can get just the housing let me know. Thank you

[Eric Noa]

Guys I found them.... I just called the dealer and they have the housing for $10 each. They had to order me the right side because they only had the left side... Should have it by Thursday.

[boystar22]

Post the part numbers for them when you get them. I've been unable to find them in the parts manifest online.

[Eric Noa]

Post the part numbers for them when you get them. I've been unable to find them in the parts manifest online.

kk no problem. When I go get them on Thursday I will post pics and part #. Have you tried calling your local dealer?

[boystar22]

kk no problem. When I go get them on Thursday I will post pics and part #. Have you tried calling your local dealer?

I haven't bothered to call them yet, since they technically don't fit my car anyway. I'm planning at some point to do a +2010 front end conversion on my 08' so I'd just like to get a list of part numbers and such together before hand. It's a project thats still a ways off for me.

[Eric Noa]

alright no problem. As soon as I get them I will post the info here.

[bmann]

Here are the part numbers found them on another site:
62256-zx10B and 62257-zx10B.

[Eric Noa]

Well I went to Nissan this morning to pick up the fog light housing and when I get there they tell me that they sent the wrong side. So I need to go back tomorrow to get the other side Im missing. Here are some pictures along with the part's #.

[Eric Noa]

Here is the side I was missing! Just came back from picking it up!

[boystar22]

Thanks guys!

[basspro]

Thanks guys just got mine now can some one tell me what fog lights go in the new 2011 coupe or maybe a part number They are a lot of for fog lights on ebay that say they will fit BUT they all look a little different Thanks

[AlexN09]

Yeah I hate to be bothersome, but if you purchase just the housings would any aftermarket fogs be plug and play or would you have to go really custom here?

[Eric Noa]

I haven't order the fog lights yet but I assume they will go right in. Once I order them and install them I will post pictures on here so you guys can see.

[boystar22]

From what I've read the actual foglight assembly hasn't changed for the coupes from 2008-2012. We just don't have the finisher shroud like you guys do, but the assembly attaches to it just like it attaches to the big black lower grill we have. Don't quote me on this but i'm 99% sure they are the same.

I bought a DEPO set off ebay for about $60 and they are exactly like the oem ones and fit perfect.

[bmann]

The lights must be OEM style to fit. On my 2010 coupe, It was prewired so I bought the oem kit. You have to remove the plastic pieces that come on the fog lights and buy a couple of quick nuts and screws. I bought 6mm ones from my local ACE hardware store. Then I used the new Turnsignal stalk with the fog light switch (comes in the kit). Took me about and hour or so. Hope this helps.

[SanoSuKe]

So Eric any updates?