180sx wiring harness issue

ONLY for ADVANCED technical discussion about the 240sx!
Mecho180sx
Posts: 11
Joined: Sun Feb 14, 2016 2:36 pm
Car: nissan 180sx, nissan 240sx

Post

Okay so i'm most likely just being an idiot right now, and about to ask a noob question to something i'm just overlooking...

Now the issue I am having is I purchased a full sr20det swap but was planning to swap it into a 240sx so the engine harness I got with it is wired for a 240sx. I recently got a 180sx shell in my possession that came with an engine harness for an sr20det but has been rewired for splitfire injection and aem map sensor setup. And I cannot use that with a relatively stock sr20det obviously.

I have been viewing wiring diagrams and wiring guides for the sr20det harness, and also found a picture of a stock sr20det wiring harness for a 180sx. Most of the plugs on my 240sx sr20 harness match the plugs in the picture (http://hw173kn.angryhosting.com/MA240/S ... nessid.JPG). Its obvious that I have to change the DASH CONNECTOR plug on the 240sx harness to the one that came from the 180sx. Where i'm stumped is which other plugs do i change / what else do I have to rewire?

Here's photos of the 240sx sr20 harness that i'm trying to use with the 180sx (not using the harness that came with the 180sx, other than taking plugs off it if required to change)

http://i.imgur.com/ktJBc7y.jpg

http://i.imgur.com/1tZeeiL.jpg

http://i.imgur.com/UlBQtLh.jpg

http://i.imgur.com/YiSLOZE.jpg

http://i.imgur.com/V6uj1Cl.jpg

http://i.imgur.com/M5iE3Px.jpg

http://i.imgur.com/UfuVWA7.jpg

Thanks in advance for helping me with my most likely noobie idiot question.


Mecho180sx
Posts: 11
Joined: Sun Feb 14, 2016 2:36 pm
Car: nissan 180sx, nissan 240sx

Post

Figured it out, I was being dumb


Return to “240SX Technical Forum”